Hydra-Lift Karriers

The Specialist In Drum Handling Equipment

> > Click to Watch Video < <

Lift and Dispense a Drum
•t

You Control Lifting Height and Pouring Angle

•t

Removes Effort and Increases Productivity

MADE •t
•t
IN

USA •t
•t

Power Lift and Tilt Options
3600 Tilt Control in Either Direction

•t

Available with Spark Resistant Parts

•t
•t

Capacity: 800 Lb. (363 kg) full drum
(500 Lb. (227 kg) half-full* drum)

Easily handle a heavy drum with a
Morse Hydra-Lift Karrier. Lift, move
and control pouring of a 55-gallon
(210 liter) drum weighing up to 800 Lb.
(363 kg) with minimal effort. Handle a
variety of drums by installing the correct
accessories for your drum. Models with
maximum pouring heights of 72” or 96”
(183 or 244 cm).

•t
•t
•t

You can raise and control dispensing
as necessary. Increase pouring angle
for full discharge, reduce to control the
pour rate, or reverse to stop pouring
and deliver partial drum contents.
Material is poured forward straight from
the drum with variable lift and pour
angles. Faucets, pipe, valve extensions,
etc. may be attached to the drum.

Drum Handling System

Automatically adjusts for 22” to 23.5”
(56 to 59.7 cm) diameter drum
Accepts Diameter Adaptors for smaller drums
Accepts Top Rim Clamp or Bracket Assembly to
handle a plastic drum
Flexible cinch chain cover helps
protect drum sidewall
Alloy cinch chain and hinge
Durable stress relief weld joints
Each Hydra-Lift Karrier Features
Heavy-duty hydraulic ram with a built-in flow control for
a uniform, controlled speed of descent with even the
heaviest drum.
Welded rectangular steel tube framework.
Maneuver on two 8” (20.3 cm) durable polyolefin wheels
and two 4” (10.2 cm) swivel casters. A screw down floor
lock.
Manual-Lift models have hydraulic hand pump with
variable release valve for drum lift.

Model 400A-96-110
with 96” dispensing height
and electric power lift and tilt.

Manual-Tilt models have 30:1 reduction to make pouring
your drum simple and easy.

Manual Tilt Controls (Power Options pg 2)

Manual Tilt Control Options

Though most often used to lift and pour,
the Hydra-Lift Karrier can also be used
to lift drums on and off scales, platforms,
conveyors or trucks, move drums to or
from storage, or position drums of parts
for hand access at work stations.

Hand
Crank

Option # 3900i-P
We recommend the
MORStop Tilt-Brake to
automatically hold drum tilt
angle.

Hydraulic
Hand
Pump

Option X01 Hand Crank with
MORStop Tilt-Brake

Model
400A-60

Model
400A-72

Model 400A-60 has hand crank tilt control.
Models 400A-72 and 400A-96
have pull chain and chain wheel
tilt control.

Option X02 Simple Hand Crank
Option X03 (not shown)
16” (40.6 cm) Hand Wheel

Reach Beyond Front Wheels with a 55-Gallon Steel Drum

Maximum
Tilt
Model # Dispensing
Control
Height

R

400A-60

72”
183 cm

Hand
Crank

6”
15 cm

55”
60”
44”
140 cm 152 cm 112 cm

37”
94 cm

6’

2” (5.1 cm)

15” (38.1 cm)

0

12” (30.5 cm)

-7” (17.8 cm)

400A-72

72”
183 cm

Chain
Wheel

6”
15 cm

55”
60”
44”
140 cm 152 cm 112 cm

37”
94 cm

6’

311 Lb.
141 kg

96”
244 cm

Chain
Wheel

-3”
69”
72.5”
49”
42”
-7.6 cm 175 cm 184 cm 124 cm 107 cm

7’

60” (152.4 cm)
72” (182.9 cm)

O.D.

I.D.

13” (33 cm)

0

60” (152.4 cm)

13” (33 cm)

-3” (-7.6 cm)

72” (182.9 cm)

11” (27.9 cm)

-7” (-17.8 cm)

6” (15.2 cm)

-15” (-38.1 cm)

96” (243.8 cm)

379 Lb.
172 kg

-1” (-2.5 cm)

84” (213.4 cm)

400A-96

- N/A -

11” (27.9 cm)

48” (121.9 cm)

Turning
Ship
Radius Weight

6” (15.2 cm)

36” (91.4 cm)

308 Lb.
140 kg

400A-96

16” (40.6 cm)

48” (121.9 cm)

Dispensing Height

400A-60
or
400A-72

Dimensions
L

Reach with Drum Pouring
at 45 Degrees

36” (91.4 cm)

H

Reach with
Horizontal Drum

Model #

-3” (7.6 cm)

-20” (-50.8 cm) at 90” (228.6 cm)

* Half-full rating is based on tilt mechanism’s capacity for handling a bottom heavy drum. A partially full drum with unbalanced and shifting load is harder to tilt than a full drum.

MORSE Mfg. Co., Inc.
Phone: (315) 437-8475

•
•

727 West Manlius Street
Fax: (315) 437-1029
•

Copyright 2014 - Morse Mfg. Co., Inc.tt

•
P.O. Box 518
•
Email: info@morsedrum.com

Spec Sheet F400 t

East Syracuse, NY 13057-0518
•
Website: morsedrum.com

(Updated May 20, 2014 11:09 AM)t

1