Diameter Adaptors0 pages
Diameter Adaptors
55/30 Series
The Specialist In Drum Handling Equipment
Diameter Adaptors Allow You to Handle Smaller Drums with the Same Drum Handler
Model 55/30-16
Model 55/30-19
Insert into Drum Holder
Handle Smaller Drum
MADE
IN
USA
Diameter Adaptors for smaller
drums from 14” to 17.5” in
diameter are equipped with
adjustable hold-down brackets
to prevent your drum from
slipping lengthways through the
drum holder. Handle a drum up
to 38” tall.
Diameter Adaptors for drums
from 18.5” to 22” in diameter do
not have hold-down brackets.
They fit between the ribs of a
steel drum. For plastic or fiber
drum, use Diameter Adaptor in
combination with the Bracket
Assembly to prevent the drum
from
slipping
lengthways
through the drum holder.
Kontrol-Karrier with
Model 55/30-16
Diameter Adaptors are easily inserted into drum
holder in just a few seconds. With the hooks
slightly above the drum holder, advance it into
the drum holder and tilt the Diameter Adaptor
downward so that as the hooks engage the top
of the drum holder band, it settles into place
with its lower tabs protruding below the band.
Your drum handler is now ready to handle the
smaller drum size.
Insert the correct size Diameter
Adaptor to handle your smaller
drum. Diameter Adaptors are
available for sizes from 14” to 22”
diameter. They are available to
fit below-hook Kontrol-Karriers
as shown here, Forklift-Karriers,
Hydra-Lift Karriers, and VerticalLift Drum Pourers.
Hydra-Lift Karrier with Model 55/30-16
Forklift-Karrier with 55/30-16
Model 55/30-19GR
Diameter
Adaptor
for
30-gallon steel drum with 19”
diameter fits only 3-Piece
Drum Holder or drum holder
with load binders (185G
Series, 285G Series, 185GR
Series, 285GR Series, and
300 Series).
Use One Drum Handler for Various Size Drums by Inserting the Correct Diameter Adaptor for Each
These handy accessories allow your Morse drum handler to
handle various smaller drums. Simply and quickly place the
correct size Diameter Adaptor into the drum holder to reduce
the grip diameter to match drums smaller than a standard
22.5” diameter 55-gallon steel drum. When you complete
dispensing from your smaller drum, simply lift the Diameter
Adaptor out of the drum holder to return to handling a
55-gallon drum.
Diameter Adaptors for 17.5” diameter and smaller drums
have brackets at top and bottom of the drum. They adjust to
securely hold a drum up to 38” tall.
SPARK
RESISTANT
DIAMETER
ADAPTORS
STAINLESS STEEL
FITS
DIAMETER
DIAMETER
ADAPTORS
DOMESTIC
SHIP
WEIGHT
55/30-22
55/30M-22
55/30SS-22
21.5” to 22”
11 Lb.
55/30-20.5
55/30M-20.5
55/30SS-20.5
20” to 20.5”
23 Lb.
55/30-19
55/30M-19
55/30SS-19
18.5” to 19”
24 Lb.
55/30-17.5
55/30M-17.5
55/30SS-17.5
17” to 17.5”
35 Lb.
55/30-16
55/30M-16
55/30SS-16
15.5” to 16”
35 Lb.
55/30-14.5
Spark resistant and stainless steel
Diameter Adaptors (shown) are
available for the same diameter
ranges.
Note About Drums with Ribs:
Because it is recommended that
drums be held at their middle,
proper size Diameter Adaptor
should be used only on a drum
with a band at least 8” wide
between the ribs.
DIAMETER
ADAPTORS
55/30M-14.5
55/30SS-14.5
14” to 14.5”
36 Lb.
DIAMETER
ADAPTOR
Model 55/30SS-16
FITS
DIAMETER
DOMESTIC
SHIP WT.
55/30-19GR
Diameter Adaptors are made in 1.5” increments of diameter
to match common drum sizes. Custom drum adaptors for
sizes not shown may be built on special order. Please call
with special requirements.
DESCRIPTION
Diameter Adaptor for 30-gallon steel
drum with 19” diameter fits only
3-Piece Drum Holder or drum holder
with load binders (185G Series, 285G
Series, 185GR Series, 285GR Series,
and 300 Series).
18.5” to 19”
38 Lb.
MORSE Mfg. Co., Inc. • 727 West Manlius St. • P.O. Box 518 • East Syracuse, NY 13057
Phone: (315) 437-8475 • Email: info@MorseDrum.com
•
Website: MorseDrum.com
Copyright 2009 - Morse Mfg. Co., Inc. Spec Sheet F55/30 (Updated November 5, 2014 10:00 AM)
"