Adjusto-Karrier0 pages
Adjusto-Karrier
Model # 186
The Specialist In Drum Handling Equipment
Model 186
Adjusts to Various Diameter Drums
Handles a Wide Range of Drum Diameters
•t
Unique pads conform to drum for a secure grip
•t
Transport loaded drum by crane, hoist or chain block
•t
Allows fast dispensing of your drum
•t
High level controlled pouring
Morse Adjusto-Karrier provides a convenient means of pouring into high chutes, hoppers, vessels,
etc. It is adjustable to fit a specified range of diameters for handling fiber or steel drums (with or
without ribs) weighing up to 500 Lb. (227 kg). A hand operated pull chain permits gear driven tilt
control for pouring above a person’s reach. The 30:1 gears are equipped with safety covers.
MADE
IN
USA
To attach your Adjusto-Karrier to a drum, simply back-off the adjusting screws using the removable
crank furnished. The center rod of the three rods on each side is a threaded adjusting screw. The
others are guide rods (shown in dimensions diagram). Hoist the unit up over the drum and lower it
to a point where the gripping pads are adjacent to the center of the load. Turn the adjusting screws
to tighten the grip pads to hold the drum approximately centered in the holder frame. Turning the
adjusting crank allows the operator to “feel” the resistance of the pressure being applied, so denting
or crushing the container can be prevented.
The unique grip pads, made of a nylon core with nitrile blend cover, conform to the drum curvature
to grip securely.
When successive drums are the same diameter, gripping and releasing involves just one adjusting
screw. The other one need not be readjusted until a different diameter is encountered. Then it may
be readjusted to center the new drum.
Model 186
Adjusts to fit 15” to 23” (38.1 to 58.4 cm)
diameter containers
Dimensions
Model # 186
Handles
15” to 23” Diameter (38.1 to 58.4 cm)
Dimension A
34.375” (87.3 cm)
Dimension B
48.125” (122.2 cm)
Dimension C
28.75” (73 cm)
Dimension D
Drum diameter + 20” (50.8 cm)
Dimension E
24.5” (62.2 cm)
Morse Adjusto-Karrier ships assembled in a carton.
Domestic ship dimensions: t
L48” W36” H8” (122 x 92 x 20 cm)
Domestic ship weight is approximately 120 Lb. (55 kg).
Tilt Control Options
Standard tilt control is a chain wheel and a 12’ (366 cm) pull-chain loop with 6’ (183 cm) drop for high level pouring.
•t
Option X01-186t
Hand crank and MORStop Tilt-Brake
•t
Option X02-186t
Hand crank
•t
Option X03-186t
16” Hand wheel
MORSE Mfg. Co., Inc .
Phone:
(315)
437-8475
•
•
727 West Manlius St.
Fax:
(315)
Copyright 2013 - Morse Mfg. Co., Inc.tt
437-1029
•
•
Email:
Spec Sheet F186t
P.O. Box 518
info@MorseDrum.com
•
East Syracuse, NY 13057-0518
•
Website:
MorseDrum.com
(Updated September 12, 2014 4:09 PM)
"