4-Wheel Drum Trucks
160 Series

The Specialist In Drum Handling Equipment
Innovative 4-Wheel Drum Trucks

> > Click to Watch Video < <

160 Series 4-Wheel Drum Trucks

Ergonomic and versatile drum trucks stand alone on 4 wheels.
Transport and dispense from drum, then store upright.

•t
•t
•t
•t
•t
MADE
IN
USA
•t
•t
•t
•t

Ergonomic, extremely versatile drum trucks
Designed and built for safety
Carry full weight of drum during transport
Move and turn easily on four 8” MORTUF
polyolefin roller-bearing wheels
Forged steel toe prongs
•t Wide and rounded to protect drum
•t Specially shaped to ease pick-up of
drum
Hands are protected within U-shaped
handle
Model 160-SS made of type 304 stainless steel
Capacity: 1,000 lb. (454 kg)
All models ship boxed, with minor assembly required
Handle 30, 55 or 85 gallon steel drum, and most rimmed
plastic and fiber drums

Use the Chime Hook to Extend
the Support Prop

Engage the chime
hook on the drum
rim as shown here
to assist in loading
the drum.
Extend the support
prop to stabilize
the hand truck in
horizontal position
to dispense from
a drum, as shown
bottom right.

Chime
Hook

Push the chime
hook
down
to
extend the support
prop and stabilize
the drum truck in
upright
position.
Raise the chime
hook to retract the
support prop, and
engage the drum
rim.
Note: Model 160M
has a chime hook,
but not a support
prop.

Support
Prop

Drum Size Range
Minimum
14” (35.6 cm)
31” (78.7 cm)

Roll a drum
onto pallet. . .
. . .or tilt
on edge of
pallet. Extra
long handle
provides
leverage for
control.

Model 160-WP
for use on rough terrain

Dispense drum with ease
When pouring a drum the
frame
and
extendable
support prop stabilize the
truck in horizontal position.
The truck also stands alone
with extendable support
prop.

28” (71.1 cm)

Height

Move drums on and off pallets

Maximum

Diameter

41” (104.1 cm)

MORSE Mfg. Co., Inc. • 727 West Manlius St. • P.O. Box 518 • East Syracuse, NY 13057-0518
Phone: (315) 437-8475 • Fax: (315) 437-1029

info@MorseDrum.com

Copyright 2014 - Morse Mfg. Co., Inc.t
(Updated September 12, 2014 4:08 PM) t

Model 160-WP-SS
Stainless Steel Drum Truck
for use of rough terrain
Models with 10” pneumatic wheels mounted
outside the frame are designed for traveling over
rough terrain or grating. Model 160-WP-SS is
made of type 304 stainless steel.

Add Option 5058-P for 55-gallon rimless plastic
drum, or for a smaller drum

Email:

Model 160
Model 160M with Spark Resistant Parts

•

Website:

Spec Sheet F160

MorseDrum.com

Please contact your Morse dealer