Below-Hook Kontrol-Karriers to lift and pour drum0 pages
KONTROL-KARRIERS
Models 185A and 185AM
The Specialist In Drum Handling Equipment
> > Click to Watch Video < <
Lift and Dispense a Drum with Your Hoist or Crane
Kontrol-Karriers - 800 Lb. (363 kg) Capacity
•t
MADE
IN
USA
•t
Provides controlled high-level pouring
above your reach
Drum Handling System
0
•t
Allows 360 drum tilt control in both directions
•t
Saves time, reduces waste, and improves
productivity
•t
Model 185AM has spark resistant parts
•t
s Automatically adjusts for
22” to 23.5” (56 to 59.7 cm)
diameter drum
s Accepts Diameter Adaptors
for your smaller drum
s Bolt-on Top Rim Clamp or
Bracket Assembly to handle plastic drum or more
securely handle fiber drum
Custom versions available
•t
Longer arms for use with Drum Cone
•t
Nested lifting point to reduce
required head room
•t
USDA approved epoxy
or “steel-it” paint
s Includes a flexible cover on the cinch chain
to help protect the sidewall of your drum
s Incorporates alloy cinch chain and durable
t stress relief weld joints
Morse Kontrol-Karriers have a 12’ (30.5 cm) long pull chain
loop with 6’ drop so you control drum tilting, 3600 in either
direction. Dispense a drum overhead with your crane or hoist.
Can also be ordered with Hand Crank or Hand Wheel option
for use only within reach of operator.
Models 185A & 185AM Kontrol-Karriers
s Stand upright on new foot support
s Handle drum with drum faucet in place
s Have 800 Lb. (363 kg) full-drum capacity
(500 Lb. (227 kg) half-full* drum capacity).
185AM
ADAPTORS FOR
SMALLER DRUM
Domestic
ship weight
Handle 55-gallon steel drum
185A
OPTIONS
TO HANDLE
Poly or fiber drum
55/30 Series
71 Lb. (32 kg)
Spark Resistant Parts, handle 55-gallon steel drum
Poly or fiber drum
55/30M Series
68 Lb. (31 kg)
KONTROL-KARRIER DESCRIPTION
s Have chain wheel controlled tilt
with 30:1 gear ratio and safety cover
We recommend the MORStop Tilt-Brake option to automatically
hold the drum tilt angle unitl you move it. This prevents a
partially full, unbalanced drum from turning out of control, even
when the contents shift from one end to the other.
MODEL #
TM
NEW
Attaches to your hoist or crane for quick,
sure below-hook drum handling
s Domestic ship dimensions: L39” W39” H10”
(99 x 99 x 25.4 cm). Ships class 77.5
* Half-full rating is an indication of capacity for tilting an
unbalanced, bottom-heavy drum. A partially full drum with
unbalanced and shifting load is harder to tilt than a full drum.
MORcinch Options
Bracket Assembly
for rimless poly drum or to more
securely handle a fiber drum
Diameter Adaptors
Top Rim Clamp
We recommend Option # 3900i-P
MORStop Tilt-Brake factory installed on
your Kontrol-Karrier to automatically hold
the drum tilt angle.
for smaller diameter drum
for 55-gallon (208 liter)
rimmed plastic or fiber drum
Part # 3900-P MORStop Tilt-Brake Kit
for field installation.
The Bracket Assembly provides a brace
at top and bottom of your drum to prevent
it from slipping lengthways through the
drum holder. The Bracket Assembly is
required to handle a rimless plastic drum,
and recommended to more securely
handle a fiber drum. It adjusts for 31” to
39” (79 to 99 cm) tall drum.
The Top Rim Clamp grips the upper rim
of your drum to prevent it from slipping
through the drum holder. Use to handle
a 55-gallon (208 liter) rimmed plastic or
fiber drum. To handle a 55-gallon plastic
drum with top rim, you must install either
the Bracket Assembly or the Top Rim
Clamp.
Part # 4556-P Bracket Assembly.
Part # 4560-P Rim Clamp Assembly.
Part # 4556M-P Spark Resistant Bracket
Assembly.
Part # 4560M-P Spark Resistant Rim
Clamp Assembly.
Diameter Adaptors t insert into the
drum holder to handle your smaller drum.
Select the correct size Diameter Adaptor
for each drum (side 2). Spark resistant
and stainless steel Diameter Adaptors are
also available.
Web Strap and Ratchet
MORcinchTM Drum Holder with Option #
5115i-P Web Strap and Ratchet installed
(not for use on spark resistant models)
MORSE Mfg. Co., Inc. • 727 West Manlius Street • P.O. Box 518 • East Syracuse, NY 13057-0518
Phone: (315) 437-8475
•
Fax: (315) 437-1029
Copyright 2014 - Morse Mfg. Co., Inc.t
•
Email: info@morsedrum.com
Spec Sheet F185At
•
Website: morsedrum.com
(Updated December 9, 2014 4:08 PM)t
1
Option X01-185
Hand Crank with
MORStop
Tilt-Brake.
Option X02-185
Hand Crank.
Option X03-185
16” (40.6 cm) Hand
Wheel (not shown).
Option 4623-P
Counter Weight
keeps your
Kontrol-Karrier
hanging plumb,
even without
a drum in the
holder.