Model # 915
Drum Mover / Stacker

The Specialist In Drum Handling Equipment

The Evolution of Drum Handling
Power-Propelled Walk-Behind Drum Handlers Improve Productivity
Morse Model # 915
Power-Propelled < PILOT >
MORSpeed TM Drum Mover / Stacker
•t

Handle a 1500 Lb. (680 kg) drum

•t

Position drums in rack with virtually zero clearance between

•t

Power-Propelled Walk-Behind and Powered Drum Lift

•t

MADE
IN
USA

Lift and transport an upright drum up to 10 feet (3 m) high!

•t

Rack a 55-Gallon (208 liter) steel or plastic drum with suitable top rim

The safety conscious MORSpeed
racks, pallets, trucks, etc.

TM

Drum Mover / Stacker, allows you to move drums on and off

TM

The MORSpeed drum grabber is a proven, safety conscious way to handle drums. Lift and
move almost any rimmed steel, fiber or plastic drum, regardless of diameter. It requires no manual
contact with drum, utilizing a completely mechanical and automatic drum grab as you raise against
the side of your drum. The mechanism automatically releases drum when you set it down on floor,
shelf, pallet, etc.
Note: Requires a minimum drum height of 24” (61 cm), and minimum drum weight of 75 Lb. (34 kg)
to activate the drum gripping mechanism.

Familiar Controls for propulsion
and steering. Raise and Lower
Buttons incorporated in handle.

“feathering” for accurate payload positioning
through full emergency stop. When released, the
handle returns to upright position and applies the
brake.

The Morse model # 915 < PILOT >
MORSpeedTM
Drum
Mover
/
Stacker
features intuitive, industry-standard throttle,
steering and drum positioning controls...
...so you can put them online quickly.

Built-in safety systems include a proven
“belly-button” switch, which helps prevent
an operator being pinned between the
< PILOT > and any other object. Upon body
contact, the switch activates low speed in the
opposite direction.

Model # 915 < PILOT > MORSpeedTM Drum Mover
/ Stacker is designed to lift a drum weighing up to
1500 Lb. (680 kg) at 25 ft/min (5 cm/sec).*
Control the travel speed with ergonomic
twist grip or thumb control. Maximum travel
speed is 3.0 mph (4.8 km/hr) or 4.4 ft/sec
(1.3 m/sec) with 1500 Lb. (680 kg) drum.*
Maneuver in narrow aisles with a turn radius of
just 58” (147 cm) on smooth rubber rear drive
wheel, and polyurethane front wheels.

“Dead-man” braking occurs when spring loaded
control handle is released, turning off electrical
power and applying the brakes.
The internally mounted 24V battery has a builtin “smart” charger to provide amount of charge
necessary. Simply plug into a standard 110V AC
outlet with the included cord. The batteries can be
fully charged from empty in about 8 hours.

Adjust straddle I.D. from 38” to 50” (96.5 to 127
cm), adjustable in 4” increments to work with
various size pallets.
Moving steering control handle to top and bottom 15° of handle arc actuates brake
proportional to handle movement, allowing operator complete control of braking from

Model #
915

* Note: Lift and travel speeds will increase with lighter loads. For example, maximum
travel speed with an empty drum is 3.6 mph with maximum lift speed of 39 ft/sec.

Maximum
Lift Height

Description
< PILOT > Power-Propelled MORSpeedTM Drum Mover / Stacker

MORSE Mfg. Co., Inc.
Phone: (315) 437-8475
•

Lift Control Handle

Domestic
Ship Weight

Domestic
Ship Dimensions

124” (316 cm)

2189 Lb. (993 kg)

L86“ x W45“ H87“ (218 x 114 x 221 cm)

•
727 West Manlius St.
•
P.O. Box 518
•
Email: nicepeople@MorseDrum.com
Fax: (315) 437-1029
•

Copyright 2014 - Morse Mfg. Co., Inc.tt

Spec Sheet F915ttt

•

East Syracuse, NY 13057-0518

Website: MorseDrum.com

(Updated September 16, 2014 10:49 AM)t

1