Drum Pumps
The Specialist In Drum Handling Equipment
High Volume, Inexpensive Drum Dispensing
Corrosion Resistant,
Hand Operated Drum Pumps

•t

MADE
IN
USA

Delivers on forward and on back
strokes

•t

Pump a gallon in fewer than
5 cycles

•t

Self priming

•t

Built-in siphon breaker

•t

This double-action piston pump is self-priming
and delivers on the forward and the back stroke.
Less than five cycles yields a gallon (3.8 liters).
The two position handle may be mounted
either above or below the pump. The handle
can be padlocked to prevent unauthorized
dispensing. A built-in siphon breaker prevents
unwanted flow when pumping is stopped. It
will operate wet or dry without damage. Unlike
ordinary metal hand pumps, it will even handle
fresh or salt water. Rust is no problem here!

Double-action piston pump

•t

Accept a padlock

Generally speaking, this type of pump can
be used for chemically compatible liquids at
temperatures up to 800 F (260 C) and having
maximum viscosity of 2,000 SSU. Model series
26 and 27 are generally useful with compatible
liquids in a mild acidity/alkalinity range of pH49. Avoid acids and caustics with #26 and #27
series. Model 28 pumps are useful in a wider
pH range.
Please note: Chemical compatibilty of a
pump should be checked for each liquid by
chemical name. See chart below for general
guide.
The chart includes a short list of typical
liquids for each pump. Other liquids may be
compatible. The chart shows what materials are
used to make each pump so that you may chck
compatibility with other chemicals. Beware that
many chemicals can exist in various degrees
of concentration. For example, acids.† Some
liquids, such ascleaning solutions, detergents,
or soaps seem to be “mild” when diluted for
use, but can be very caustic or acidic in the
drums before dilution.
Quality engineered thermoplastic construction
with specific elastomer parts for chemical
resistance.
Model #
26

Construction
O-Ring
(All have some
Material
T316SS)

Drum Pumps Ship Complete
Morse hand Operated Drum Pumps come
complete with 8’ (2.4 m) discharge hose with
nozzle, suction tube and coupler with extension to
reach the bottom of a 55 gallon (208 liter) drum, 2”
(NPT) bung adaptor, and Operator’s Manual and
parts List.
Ships “knocked down” in a 21” x 9” x 9” (53 x 23 x
23 cm) carton. It can go U.P.S.

Use Drum Pump with drum on
model 125 No-Spill Drum Truck
Carries drums upright. Hinged handle makes it
simple to move and steer. 8” polyolefin wheels
and swivel caster. Capacity 1200 Lb. Shipped in
sturdy carton suitable for UPS.
Domestic
Ship
Weight

Gasket
Material

Hose
Material

Suction
Tube

Compatible Liquids*
(General Guide)

PVC

polyester

petroleum products, lube oils*

10 Lb.

polyester

viton

cork-nitrile

27-1AE

polyester

EPDM

EPDM

EPDM

polyester

methyl alcohol, ethyl alcohol*

10 Lb.

27-4AV

polyester

viton

viton

cross linked polyethylene

polyester

some napthas*, somearomatics*

12 Lb.

28-5BV

ryton

viton

viton

cross linked polyethylene

teflon

some chlorinated solvents, acids, aromatics,
xylene*

12 Lb.

28-6BE

ryton

EPDM

EPDM

EPDM

teflon

some acids, caustics, ketones, acetates*

11 Lb.

Please contact your Morse dealer

*NOTE: General guide only. Final determination of suitability for use
intended or manner of use is responsibility of the user. Consult Morse
for advice on specific liquids if they are not shown here. Please furnish
chemical names.
**NOTE: Chemicals may be hazardous. It is the user’s responsibility to
take appropriate safety and protective measures. Specifications subject to
change without notice.

MorseDrum.com

© 2010 - Morse Mfg. Co., Inc.t

Spec Sheet F26