Tilt-To-Load Drum Tumbler with Automated Control Package0 pages
Tilt-To-Load Drum Tumblers
with Automated Control Package
and Safety Enclosure
The Specialist In Drum Handling Equipment
> > Click to Watch Video < <
Drum Tumbler with Automated Control Package
Tilt-To-Load Drum Tumbler with Automated Control Package
Installed by Morse Technician and Safety Enclosure
Automatically lifts your drum, rotates it for the time you set. . .
. . .then returns it to upright at floor-level
A Tilt-To-Load Drum Tumbler with the advanced Automated Control Package installed by a Morse
technician, it automatically lifts your drum, rotates for the time you set, and then returns it to
upright position at floor-level for easy handling. The built-in safety interlock on the enclosure
automatically shuts off the drum rotator when the gate is opened. Watch the video to see how it
works.
Load your upright drum at floor level with a drum truck or
drum lifter hoist attachment.
MADE
IN
USA
Set the desired time of drum rotation anywhere from a
few seconds to 16 hours, push the start button, and walk
away. You preset the tumbling speed from 5 to 20 RPM.
The enclosure has an integrated safety interlock, in
accordance with OSHA requirements, so the machine
automatically shuts off when the door is opened.
In case of any problem during operation, the
tumbler can be interrupted by hitting the red
emergency stop knob.
Outside post-to-post Dimensions:
L88” x W52” x H74” (224 x 132 x 188 cm).
Tumble a steel, plastic or fiber drum from
29” to 37” (74 to 94 cm) tall, and from 18” to
23.5” (46 to 60 cm) in diameter.
Install all Morse Rotators in accordance with OSHA requirements for enclosure and
safety interlock, etc. so the rotator automatically turns off when enclosure door is
opened. One way to accomplish this is with a Morse enclosure with safety interlock.
For OSHA compliance, see OSHA subpart O.1910.212(a)(4) “Barrels, containers, and
drums. Revolving drums, barrels, and containers shall be guarded by an enclosure
which is interlocked with the drive mechanism, so that the barrel, drum, or container
cannot revolve unless the guard enclosure is in place.”
Tilt-To-Load Drum Tumbler with Automated Control Package
and Safety Enclosure
Power connections and motor controls must comply with applicable codes.
Ships in Two Parts
Model #
Drum Tumbler with Automatic Controls
Guard Enclosure Kit
Ship Weight
Ship Dimensions
Ship Weight
Ship Dimensions
311-1-115
1136 Lb. (516 kg)
L77” W62” H62” (196 x 157 x 157 cm)
400 Lb. (181 kg)
L101” W31” H66” (257 x 79 x 168 cm)
311-1-230
1136 Lb. (502 kg)
L77” W62” H62” (196 x 157 x 157 cm)
400 Lb. (181 kg)
L101” W31” H66” (257 x 79 x 168 cm)
311-3-230
1136 Lb. (516 kg)
L77” W62” H62” (196 x 157 x 157 cm)
400 Lb. (181 kg)
L101” W31” H66” (257 x 79 x 168 cm)
311-3-460
1136 Lb. (487 kg)
L77” W62” H62” (196 x 157 x 157 cm)
400 Lb. (181 kg)
L101” W31” H66” (257 x 79 x 168 cm)
311-3-575
1136 Lb. (516 kg)
L77” W62” H62” (196 x 157 x 157 cm)
400 Lb. (181 kg)
L101” W31” H66” (257 x 79 x 168 cm)
311-1-220-50
1136 Lb. (516 kg)
L77” W62” H62” (196 x 157 x 157 cm)
400 Lb. (181 kg)
L101” W31” H66” (257 x 79 x 168 cm)
311-3-220-50
1136 Lb. (516 kg)
L77” W62” H62” (196 x 157 x 157 cm)
400 Lb. (181 kg)
L101” W31” H66” (257 x 79 x 168 cm)
311-3-380-50
1136 Lb. (516 kg)
L77” W62” H62” (196 x 157 x 157 cm)
400 Lb. (181 kg)
L101” W31” H66” (257 x 79 x 168 cm)
311-3-440-50
1136 Lb. (516 kg)
L77” W62” H62” (196 x 157 x 157 cm)
400 Lb. (181 kg)
L101” W31” H66” (257 x 79 x 168 cm)
MORSE Mfg. Co., Inc.
•
727 West Manlius St.
•
P.O. Box 518
•
East Syracuse, NY 13057-0518
Email: info@MorseDrum.com
•
Website: MorseDrum.com
Phone: (315) 437-8475
•
Fax: (315) 437-1029
•
Copyright 2011 - Morse Mfg. Co., Inc.tt
Spec Sheet F311t
(Updated February 21, 2011 12:54 PM)ttt
1
"