Enclosures for Drum Tumblers0 pages
The Specialist In Drum Handling Equipment
Enclosures with Safety Interlock
for Drum Tumblers
Enclosures with Safety Interlock
Comply with OSHA Requirements (Enclosure Kits Sold Separately)
Enclosures for Morse Drum Tumblers have a safety interlock to automatically shut off the drum rotator when the gate is opened. Open the enclosure gate, place your
drum onto the drum rotator, then close the gate to allow operation. Connections are included for air powered models only. Customer to provide controls and connections
for 1-phase and 3-phase AC models.
MADE
IN
USA
Install all Morse Drum Rotators in accordance with OSHA requirements for enclosure and safety interlock, etc. Drum rotator automatically turns off when enclosure door
is opened. For OSHA compliance, see OSHA subpart O.1910.212(a)(4) “Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an
enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place.” Power connections
and motor controls must comply with applicable codes.
Enclosure outside post-to-post dimensions:
L76” x W52” x H63.25” (193 x 132 x 161 cm)
Guard
Enclosure Kit
Gate
Switch
Domestic
Ship Weight
Domestic Ship Dimensions
Fits model 309-3 Drum Tumbler
AC
400 Lb. (181 kg)
L101” W31” H66” (257 x 79 x 168 cm)
GEK-309-E1
Fits model 309-E1 or 309-E1-50 Drum Tumbler
AC
400 Lb. (181 kg)
L101” W31” H66” (257 x 79 x 168 cm)
GEK-309-E3
Fits model 309-E3 or 309-E3-50 Drum Tumbler
AC
400 Lb. (181 kg)
L101” W31” H66” (257 x 79 x 168 cm)
Fits model 309-A Drum Tumbler
Air
400 Lb. (181 kg)
L101” W31” H66” (257 x 79 x 168 cm)
GEK-309-3
GEK-309-A
Description
(drum roller sold separately)
*t
ONLY NON-Explosion Proof AC Control Packages include a pre-wired control box. Models with explosion proof Control Packages have no wiring from the t
NEMA 7/9 control box to the motor. Please consult an electrician to complete the wiring in accordance to your local code. t
**t
Explosion Proof motors on models 309-E1 and 309-E1-50 are rated for Class 1 Group D.
Other Explosion Proof motors are rated for Class I Group D, and Class II Groups F and G.
*** t
Air powered models require plant air at 40 to 60 psi and flowing at a rate of 40 scfm. Filter, Regulator, Lubricator and valve are included with MODEL 309-A
Website: morsedrum.com
Copyright 2014 - Morse Mfg. Co., Inc.tt
Spec Sheet FGEK-309t
(Updated September 17, 2014 2:26 PM)ttt
1
"