Enclosures for Portable Drum Rollers0 pages
Enclosures with Safety Interlock
for Portable Drum Rollers
The Specialist In Drum Handling Equipment
Enclosures with Safety Interlock
Help You Comply with OSHA Requirements
(Drum Rollers Sold Separately)
Enclosures for Morse Portable Drum Rollers have a safety interlock to
automatically shut off the drum roller when the gate is opened. Open the
enclosure gate, place your drum onto the drum roller, then close the gate
to allow operation. Connections are included for single-phase AC and for
air powered models only. Customer to provide controls and connections for
3-phase AC and for explosion-proof AC models.
Outside post-to-post Dimensions: tL52” x W40” x H63.25”
ttt
(132 x 102 x 161 cm)
Install all Morse Drum Rotators in accordance with OSHA requirements for
enclosure and safety interlock, etc. Drum roller automatically turns off when
enclosure door is opened.
MADE
IN
USA
For OSHA compliance, see OSHA subpart O.1910.212(a)(4) “Barrels,
containers, and drums. Revolving drums, barrels, and containers shall be
guarded by an enclosure which is interlocked with the drive mechanism, so
that the barrel, drum, or container cannot revolve unless the guard enclosure
is in place.”
Power connections and motor controls must comply with applicable codes.
Guard
Enclosure Kit
Gate
Switch
Description
(drum roller sold separately)
Domestic
Ship Weight
Domestic
Ship Dimensions
GEK-201-1
Fits Portable Drum Roller with 1-phase electric motor
AC
340 Lb. (154 kg)
L101” W31” H66” (257 x 79 x 168 cm)
GEK-201-3
Fits Portable Drum Roller with 3-phase electric motor
AC
340 Lb. (154 kg)
L101” W31” H66” (257 x 79 x 168 cm)
GEK-201-E1
Fits Portable Drum Roller with Explosion-proof 1-phase electric motor
AC
340 Lb. (154 kg)
L101” W31” H66” (257 x 79 x 168 cm)
GEK-201-E3
Fits Portable Drum Roller with Explosion-proof 3-phase electric motor
AC
340 Lb. (154 kg)
L101” W31” H66” (257 x 79 x 168 cm)
Fits Portable Drum Roller with Air motor
Air
340 Lb. (154 kg)
L101” W31” H66” (257 x 79 x 168 cm)
GEK-201-A
* Explosion Proof rated for Class I Group D, and Class II Groups F and G
* Explosion Proof rated for Class I Group D, and Class II Groups F and G
MORSE Mfg. Co., Inc.
Phone: (315) 437-8475
•
•
727 West Manlius St.
Fax: (315) 437-1029
•
Copyright 2014 - Morse Mfg. Co., Inc.tt
•
P.O. Box 518
Email: info@MorseDrum.com
Spec Sheet FGEK-201t
•
•
East Syracuse, NY 13057-0518
Website: MorseDrum.com
(Updated September 16, 2014 10:56 AM)tt
1
"