The Specialist In Drum Handling Equipment

Double Stationary Drum Rollers
2-5154 Series

Double Stationary Drum Rollers
•t

MADE
IN
USA

Save time, labor and money

•t

Blend ingredients right inside
your sealed drum

•t

Eliminate transfer, clean-up,
special vessels and apparatus

•t

Ensure Homogeneity

•t

Capacity per drum:
Liquid load: t
Dry load varies: t
ttt
ttt

Click Here to Watch the Video

1,000 Lb. (455 kg)
400 Lb. (182 kg) at 10 RPMtt
300 Lb. (136 kg) at 20 RPM
250 Lb. (114 kg) at 30 RPM

Roll 1 or 2 drums a a time
(Model 2-5154/20-3 shown
rolls drums at 20 RPM)

Fixed Speed Drum Rollers

Designed to rotate one or two drums at a time at factory fixed drum speed of
10, 20, or 30 RPM, based on 22.5” (57 cm) diameter drum.

Double drum rollers have a heavy duty 1 HP motor to drive an efficient gear
reducer connected to a 1”(2.54 cm) diameter shaft operating eight 6” (15.2
cm) diameter neoprene drive wheels. There are four roller bearing idler
wheels for each drum position.

Variable Speed Drum Rollers

Handle: One or two steel drums 6” to 28” (15 to 71 cm) diameter and up to
40” (102 cm) long.

Rotate one or two drums at a time at any speed from
1 to 38 RPM. Find the best speed for each material.
Some use high speed for initial mixing and low speed
for prolonged agitation. Variable speed drum rollers are
ideal for experimental use or where there is a variety of
materials to be handled.
ROTATE VARIOUS DRUM SIZES: A simple three-bolt attachment feature
enables the user to relocate the idler wheel shaft assembly to adjust for
various drum diameters. Set screws at each wheel permit easy repositioning
to support various length drums.
GROUNDING STRAP: Spring steel grounding straps are standard at every
drum position to help drain possible static charge from drums.

ROLL PLASTIC DRUMS:
Roll 55-gallon (208 liter) plastic
drums on a stationary drum roller
with option POLY-2-5154. It provides
extra wheels to support the flexible
soft sides of your 55-gallon plastic
drum, and an end stop to prevent
it from traveling lengthways while
being rolled, because plastic drums
lack rigid ribs or roll rings.

Export ship dimensions: L 107” W 29” H 24” (271 x 74 x 61 cm)

Recommended Loading Method
Efficiently load drum rollers with
overhead lifting equipment and
Morse model 41 Drum Lifting
Hook (shown right), or model 42
Drum Lifter.

Air motors are vane-type and require correctly sized filter, regulator,
lubricator, valve (FRL) and piping supplied by customer. Air Motor Technical
Information
Filter, regulator and lubricator (FRL) may be ordered from Morse.

Optional Idler Attachment part # 1-5-1
facilitates rolling 1 to 5 gallon size
(3.8 to 18.9 liters) cylindrical cans /
pails. Install one idler attachment for
each drum position where you want
to roll a pail. It is easily removed to
return to rolling drums.

•

Domestic Ship dimensions: L 102” W 40” H 21” (259 x 102 x 53 cm)

Explosion-Proof *** motors are rated for Class I Group D, and Class II
Groups F and G.

ROLL A 5-GALLON PAIL:

•

Base Dimensions: 24” x 94” (61 x 234 cm)

MOTOR SELECTION: The
basic motor is a three phase,
230/460V, 60Hz, TEFC motor.
Other motor voltages, phases,
enclosure types, etc. (for
example: Explosion-Proof ***)
or air motors are available. Motor controls are not included with the basic
machines. Standard Stationary Drum Rotators are shipped without control,
cord and plug and must be installed by an electrician according to local
codes and customer’s preference.

Options

MORSE Mfg. Co., Inc.
Phone: (315) 437-8475

Motor: 1 HP

•t

Part # 90020-P Description: KIT, 3/8” FRL & VALVE

Install Morse Rotators in accordance with OSHA requirements for
enclosure and interlock, etc. For OSHA compliance, see OSHA subpart
O.1910.212 “General Requirements for all Machines.” Power connections
and motor controls must comply with applicable codes.

727 West Manlius St.
•
P.O. Box 518
Email: info@morsedrum.com
Fax: (315) 437-1029
•

Copyright 2015 - Morse Mfg. Co., Inc.t

Spec Sheet F2-5154t

•

•

(Updated July 17, 2015 3:28 PM)

East Syracuse, NY 13057-0518

Website: morsedrum.com