Drum Heaters
Pail Heaters

The Specialist In Drum Handling Equipment

Drum Heaters and PailPRO 5-Gallon Pail Heaters
TM

•t

Heaters are moisture and chemical resistant

•t

Heat a 55, 30 or 15-gallon drum (208, 114 or 57 liter drum)

•t

Even heat a 5-gallon (19 liter) pail

•t

Melt or preheat process ingredients

•t

Control viscosity

•t

Promote dissolution

•t

Speed liquid flow

•t

Reduce residue in drum

•t

Speed chemical action

•t

Protect against freezing

•t

MADE
IN
USA

Heat the contents of steel, plastic or fiber drums

•t

CE marked for sale in Europe

Always
Attach Heater
BELOW
Content Level

Morse flexible drum heaters provide a
simple, effective and reliable way to heat
the contents of your drums. A drum heater is
available for almost any steel, plastic or fiber
drum. . . even heaters for metal and plastic
5-gallon (19 liter) pails.
Heaters for metal drums have an adjustable
thermostat for a control range of 50° to 425°F
(10° to 218°C). Heaters for plastic and fiber
drums have a 50° to 160°F (10° to 71°C)
thermostat.
Morse band drum heaters are made of tough,
long lasting, fiberglass reinforced silicone
rubber. They are easy to keep clean as few
chemicals will stick to silicone rubber.

115V and 230V Drum Heaters

Morse drum heaters provide heating power over a 4”
wide band around your drum.

To attach to your drum, simply wrap the drum
heater around and attach the spring and hook
arrangement. Because these heaters are pliable,
they conform to the wall of the drum. Though quick
to fasten, they assure thorough band contact for
effective heat transfer through the drum wall to the
material inside. They are more flexible than metal
band heaters, and therefore able to conform to the
drum’s surface to transfer heat more effectively.

Drum Heaters for Steel Drum or Pail
with 50° to 425°F (10° to 218°C) thermostat
•t

55-Gallon (208 liter) drum: 1500 watt

•t

30-Gallon (114 liter) drum: 1000 watt

•t

15-Gallon (57 liter) drum: 700 watt

•t

5-Gallon (19 liter) pail: 550 watt

Drum Heaters for Plastic or Fiber Drum or Pail with 50°
to 160° (10° to 71°C) thermostat

115V models have a
6 foot (183 cm) cord
and plug for ordinary
outlets. 230V models
have a 6 foot cord.
Install correct plug for
your application.

15-Gallon (57 liter) drum: 200 watt

•t

Tough fiberglass
reinforced silicone
rubber band is flexible,
chemical resistant, and
easy to keep clean.
Heater band conforms
to the drum surface,
held in contact by
spring tension. Heaters
have a 4” (10.16 cm)
wide with heating
elements.

30-Gallon (114 liter) drum: 250 watt

•t

Attach the spring and
hook to secure in place
around your drum.

55-Gallon (208 liter) drum: 300 watt

•t

Adjustable thermostat
to control the drum
temperature.

•t

5-Gallon (19 liter) pail: 150 watt

Properly positioned below the content level of the drum,
the drum heater provides uniform heat. Two or more
drum heaters may be used on the same drum for faster
warming.
Typical Applications
•t

Maintain liquid temperatures in water
purification systems

•t

Keep resin at optimum temperature

•t

Control viscosity of chemical binder in sand
casting mold operation

•t

Protect materials vulnerable to freeze damage

Adhesivestt
Lubricating oils
Asphalt/tar/creosotett
Mastics
Brinettt
Mineral oil
Chemicalstt
Molasses
Chocolatett
Paints
Corn syruptt
Plastics
Fat/grease/lardtt
Resins
Fuel oils ttt
Solvents tt
ttt
(nonflammable)
Glycerinettt
Syrups
Glycolttt
Vegetable oils
Honeyttt
Waxt
Liquid sugar/dextrose/sucrose
Note: Excessive heat may be harmful to some
materials.

MORSE Mfg. Co., Inc.
Phone: (315) 437-8475

•

•

727 West Manlius Street
Fax: (315) 437-1029
•

Copyright 2014 - Morse Mfg. Co., Inc.tt

•
P.O. Box 518
•
Email: info@MorseDrum.com

Spec Sheet F710 tt

East Syracuse, NY 13057-0518
•
Website: MorseDrum.com

(Updated November 10, 2014 4:37 PM)t

1