Stainless Steel
Hydra-Lift Karriers

The Specialist In Drum Handling Equipment

> > Click to Watch Video < <

Lift and Dispense a Drum
•t
•t

MADE
IN
USA

You Control Lifting Height and Pouring Angle
Removes Effort and Increases Productivity

•t

Power Lift and Tilt Options

•t

Heavy-Duty Hydraulics

•t

3600 Tilt Control in Either Direction

•t

Capacity: 800 Lb. (363 kg) full drum,
500 Lb. (227 kg) half-full* drum

Drum Handling System
•t
•t
•t
•t

Easily handle a heavy drum with a
Morse Hydra-Lift Karrier. Lift, move
and control pouring of a 55-gallon
(210 liter) drum weighing up to 800
Lb. (363 kg) with minimal effort.
Handle a variety of drums by installing
the correct accessories for your drum.
Models with maximum pouring heights
of 72” or 96” (183 or 244 cm).

•t

Automatically adjusts for 22” to 23.5”
(56 to 59.7 cm) diameter drum
Accepts Diameter Adaptors for smaller drums
Accepts Top Rim Clamp or Bracket Assembly
to handle a plastic drum
Flexible cover on the
cinch chain helps
protect drum sidewall
Durable stress relief
weld joints

Manual Tilt Models have
pull chain and chain wheel tilt
control.

You can raise and control dispensing
as necessary. Increase pouring angle
for full discharge, reduce to control the
pour rate, or reverse to stop pouring
and deliver partial drum contents.

Manual Tilt Control Options
Model 400A-96SS-125
has 96” (2.44 m) dispensing height,
battery power lift, and manual tilt

Material is poured forward straight
from the drum with variable lift and
pour angles. Faucets, pipe, valve
extensions, etc. may be attached to
the drum.

Each Hydra-Lift Karrier Features
Heavy-duty hydraulic ram with a built-in flow control for a
uniform, controlled speed of descent with even the heaviest
drum.

Though most often used to lift and
pour, the Hydra-Lift Karrier can also
be used to lift drums on and off
scales, platforms, conveyors or trucks,
move drums to or from storage, or
position drums of parts for hand
access at work stations.

Welded rectangular type 304 stainless steel tube
framework.
Easy maneuverability on two 8” (20.3 cm) durable polyolefin
wheels and two 4” (10.2 cm) swivel casters hidden under
the base. Stainless steel casters are available as option #
SSC-400.
A step-down floor lock to help hold Hydra-Lift Karrier in
place while you dispense from drum.

Option # 3900iSS-P
We recommend the
MORStop Tilt-Brake
to automatically hold
drum tilt angle.
Option
X01-400-72SS or X01-400-96SS
Hand Crank with
MORStop Tilt-Brake
Option
X02-400-72SSor X02-400-96SS
Simple Hand Crank
Option

X03-400-72SS or X03-400-96SS
Frame is made of type 304 stainless steel. Frame is
electropolished for a bright smooth finish. Welds are not
(not shown) 16” (40.6 cm)
ground or polished. Ratchet and pawl are not stainless
Diameter Hand Wheel
steel, but are coated with FDA compliant powder coat.
Stainless steel ratchet and pawl available as option #
5597SSi-P. Gears, sprockets and chain are not stainless
steel, but are covered with guards.
Stainless steel gears are available
Reach Beyond Front Wheels with a 55-Gallon Steel Drum
as option # SSG-MT on manual tilt
models, and option # SSG-PT on
Reach with
Reach with Drum Pouring
Model #
Dispensing Height
Horizontal Drum
at 45 Degrees
power tilt models.
Manual-Lift Models have hydraulic
hand pump with variable release
valve for drum lift.

36” (91.4 cm)
400A-72SS

Manual-Tilt Models have covered tilt
gears with 30:1 reduction to make
pouring your drum simple and easy.
Model #
400A-72SS
400A-96SS

Max.
Pouring
Height

R

72”
(1.83 m)

6”
(15 cm)

96”
(2.44 m)

Turning
Radius

Domestic
Ship
Weight

37”
(94 cm)

6’

350 Lb.
(159 kg)

-3”
69”
72.5”
49”
42”
(-7.6 cm) (175 cm) (184 cm) (124 cm) (107 cm)

7’

H

L

O.D.

55”
60”
44”
(140 cm) (152 cm) (112 cm)

I.D.

16” (40.6 cm)

48” (121.9 cm)

15” (38.1 cm)

2” (5.1 cm)
0

60” (152.4 cm)

12” (30.5 cm)

-7” (-17.8 cm)

72” (182.9 cm)

-1” (-2.5 cm)

13” (33 cm)

0

60” (152.4 cm)

13” (33 cm)

-3” (-7.6 cm)

72” (182.9 cm)

11” (27.9 cm)

-7” (-17.8 cm)

84” (213.4 cm)

6” (15.2 cm)

-15” (-38.1 cm)

96” (243.8 cm)

379 Lb.
(172 kg)

- N/A -

11” (27.9 cm)

48” (121.9 cm)
400A-96SS

6” (15.2 cm)

36” (91.4 cm)

-3” (-7.6 cm)

-20” (-50.8 cm) at 90” (228.6 cm)

* Half-full rating is based on tilt mechanism’s capacity for handling a bottom heavy drum. A partially full drum with unbalanced and shifting load is harder to tilt than a full drum.

MORSE Mfg. Co., Inc.
Phone: (315) 437-8475

•

•

727 West Manlius Street
Fax: (315) 437-1029
•

Copyright 2015 - Morse Mfg. Co., Inc.tt

•
P.O. Box 518
•
Email: info@MorseDrum.com

Spec Sheet 400SS t

East Syracuse, NY 13057-0518
•
Website: MorseDrum.com

(Updated July 10, 2015 3:16 PM)t

1