Talbot - Valves and Stopcocks0 pages
talbot valves and stopcocks data sheet.qxp
25/06/2007
10:37
Page 1
Talbot
Talbot
Valves and Stopcocks
Benefits
Available in various configurations
with outlet sizes to suit PE pipe of
16mm - 63mm (3/8" - 2")
- Valves and Stopcocks
The Talbot range of stopcocks, plugcocks and valves consists
of many individual types of product, all of which give excellent
performance characteristics. The range is available to suit PE
pipes from 16mm to 63mm using the tried and tested Talbot
Pushfit connection. In addition, when used in conjunction with
the Talbot Leadfit components, the range will suit certain sizes
of Lead pipe.
A purpose designed key with WIS
4-32-04 plastic stopcocks
provides effective protection
against any damage caused by
over-tightening
BS5433 stopcocks incorporate
the simple to use and reliable
Talbot Pushfit connection
combined with proven existing
screw-down headworks
technology
Design and selection of materials
gives high strength for installation
and operation, and corrosion
resistance for long life
Technical data
General application
Pressures:
Talbot Stopcocks and shut off devices utilise
the Talbot Pushfit connection. This fitting
uses a common body and only two sets of
interchangeable components to connect to
metric PE pipes and their imperial equivalents including heavy gauge and most normal gauge sizes.
Working: 16 bar Test: 24 bar
The pressures stated above apply with water
temperatures up to 20°C
Temperature: Up to 40°
Temperature increases may affect the installed life of
the product. For further information relating to operating
temperatures please contact our customer service
department at the telephone number shown below
Talbot Pushfit fittings can be supplied to
meet the applicable performance requirements
of:
Technical help
For further technical data, product specifications
and general information please contact our
Customer Service Department at the telephone
number shown below.
Safety
As with all industrial products it is important
to take adequate safety precautions such as
the use of adequate protective clothing like
gloves, overalls, eye protection and safety
footwear during use, maintenance and
installation.
ISO 3458, 3459, 3501, 3503
DIN 8076
WIS 4-23-04, WIS 4-32-11
KIWA BRL 534/03
Australian Standard AS/NZS 4129
BS EN 1254-3-1998
All materials used with the Talbot Pushfit fitting that
come into contact with potable water are WRAS
listed.
The Talbot Pushfit connection can be used
with PE pipe of the following specifications:
BS 6572, BS 6730, BS1972, BS 3284
DIN 8072, DIN 8074, all series
ISO 161 Parts l & ll
AWWA C901-78 PE tubing
WIS 4-32-03
ASTM - D2737 PE tubing
WIS 4-32-13
AS/NZS 4130
Tel: +44 (0)1675 437 900
e-mail: wwinfo@tyco-valves.com
Plastic Stopcocks - PE x PE
Below ground - 20 to 32mm (1/2" - 1") PE
WIS 4-23-04, 4-32-11, BS 5433 & AS1460.1
Screw down type
Gunmetal Stopcocks - PE x PE
Below ground - 20 to 32mm (1/2" - 1") PE
BS 5433
Screw down type
Gunmetal Plugcocks - PE x PE
Below ground - 25 and 32mm (3/4" - 1") PE
BS 2580
1/4 turn type
Additional Talbot Valves - See page 3
Talflo Valve
Above ground
Hand operated stand post valve
Self closing type
Pressure Reducing Valves
Double Check Valves
Large Diameter Valves
Fax: +44 (0)1675 437 909
www.tycowaterworks.com