Gunmetal Manifold Systems0 pages

EBCO GM Manifold System.qxp

22/06/2007

10:24

Page 1

Gunmetal Manifold Systems

Manifold Systems
Gunmetal Multiple Meter
Services Manifold
Benefits
Staggered meter mounts on the 6
port unit means that the unit is
compact enough to fit an 18” x
24” meter chamber.

The EBCO Stopvalve Manifold System is used to divide a
water service pipe into either 6 or 4 outlets, each outlet having
its own shut-off device in either screwdown or 1/4 turn
operation and the option for individual metering facilities.
The system can be used in crowded areas for multi-dwelling
developments and it can be used confidently in areas of
contaminated land.
The EBCO Stopvalve Manifold System is a simple and robust
unit and both its 4 and 6 port configurations are compact
enough to be installed in a standard 24” x 18” chamber.

1 1/2” female inlet and 3/4” male,
female or 25mm PE outlets allow
most types of pipe material to be
connected.
When supplied with stopvalves
each outlet has its own shut-off
device which is available with
either Screw down or 1/4 turn valve
operation.
Each unit is supplied individually
boxed for quick and easy on site
assembly.
Made from gunmetal throughout
the unit is robust and corrosion
resistant in even the most
aggressive of ground conditions.

Technical data
Pressures
Working
Water:
16 bar
Temperature: Up to 40°C

General application
Test
24 bar

Temperature increases may affect the installed life of
the product. For further information relating to
operating temperatures/pressure please contact the
EBCO customer service department at the telephone
number shown below.

Material:
Manifold body and components
Gunmetal BS1400 LG2
Blanking Plugs:
Acetal or Gunmetal
Please note that meters are not supplied as
standard with the EBCO Manifold System

Safety

The EBCO Modular Manifold system divides
a single inlet of 50mm (11/2” ) female thread
into either 4 or 6 outlets depending on
customer requirements.

Range
The EBCO Stop Valve Manifold system can
be supplied in a variety of formats:
Inlet types
50mm (11/2”) female threaded inlet
Outlet types
3/ ” male thread outlet
4
3/ ” female thread outlet
4
25mm PE connections
Valve Size (Nominal)
3/ ” Nominal
4
1/ ” Nominal
2

Edison Road
Hams Hall Distribution Park
Coleshill, Birmingham
B46 1AB United Kingdom

As with all industrial products it is important
to take adequate safety precautions such as
the use of adequate protective clothing like
gloves, overalls, eye protection and safety
footwear during installation, use and
maintenance with this product.

Valve Operation
1/ Ball Valve with Key Head
4
Screwdown with Crutch Head

Technical help

Number of Outlets:
4 or 6

Telephone: +44 (0)1675 437 900
Facsimile: +44 (0)1675 437 909
e-mail: wwinfo@tyco-valves.com
web: www.tycowaterworks.com

For further product specifications, technical
data and general information please contact
the EBCO Customer Service Department at
the telephone number shown below.

Meter Blanking Plug option:
Full Flow in plastic or gunmetal
Trickle Flow in plastic or gunmetal
No Flow in plastic or gunmetal

Tyco Waterworks

Tel: +44 (0)1675 437 900
e-mail: wwinfo@tyco-valves.com

Fax: +44 (0)1675 437 909
www.tycowaterworks.com