Talbot Matrix Boundary Boxes0 pages
Talbot Matrix Boundary Boxes.qxp
21/06/2007
09:05
Page 1
Below Ground Boundary Boxes
Talbot
Below Ground
Boundary Boxes
Benefits
Using only standard tools Matrix
can be easily installed, operated
and maintained
The Talbot Matrix Boundary Box is a telescopic, self
contained chamber system that is used to provide a safe and
clean environment for concentric meters.
The Talbot Matrix Meterbox was designed in response to
customer requirements and includes a variety of features that
provide benefits to all users - in fact, to everyone involved in
the meter supply chain.
Whether a meterbox is needed for retro-fitting or one for a
new housing development, the Talbot Matrix Boundary Box
will suit your needs.
The moulded one piece telescopic
chamber greatly reduces the risk
of leaks
Excellent visibility and access to
both the meter and control valve is
provided by the surface box lid
The 16 bar pressure rating gives
excellent performance, even
exceeding the typical 12 bar pipe
pressure rating
The robust plastic surface box has
a load bearing capacity of over
20 kN
The removable square surface box
flange aids back filling and can be
rotated through 360° to make
final alignment with paving
materials easy
Available as a short version for use
in shallow service situations
Fully designed and tested to WIS
specifications
Technical data
General application
Sizes:
Connections -
The Talbot Matrix Boundary Box system has
been designed and manufactured to comply
with Water Industry Specification No. 4-37-01
and BS5834 Part 2.
Metric, Imperial and Irish Heavy Gauge options in
the following sizes:
20mm (1/2”), 25mm (3/4”) and 32mm (1”) PE
Height adjustment
Standard Box: 470mm to 870mm
Short Box:
310mm to 545mm
The above dimensions Include 50mm of final height
adjustment in the surface box
Dimensions are taken from the centre of the inlet pipe
to the top of the surface box flange
Standards
Loading:
Watertight:
Technical help
For further technical data, product specifications
and general information please contact our
Customer Service Department at the telephone
number shown below.
BS5834 Part 2 Grade C
4-37-01 class 1 (where applicable)
1/4 turn
Valve Type:
NRV:
Single
Acetal or Polypropylene
Material:
Additional Components:
Meter Blanking Plugs:
The materials used within Matrix that come
into contact with water have WRAS
approval and Matrix has been submitted for
3rd party approval by the WRAS.
Matrix is designed for an asset life in excess
of 50 years subject to normal operating and
maintenance conditions.
As with all Talbot products the Matrix
Boundary Box system is manufactured in an
ISO 9001 quality assured environment.
Safety
Full Flow (white), Trickle Flow (yellow) and
No Flow (red).
Tools: A range of tools are available to aid
meter fitment and unit maintenance.
Spares: A full range of spares are available.
As with all industrial products it is important
to take adequate safety precautions such
as the use of adequate protective clothing
like gloves, overalls, eye protection and
safety footwear during installation, use and
maintenance.
Tel: +44 (0)1675 437 900
Fax: +44 (0)1675 437 909
e-mail: wwinfo@tyco-valves.com
www.tycowaterworks.com
"