UPE Mini Soc0 pages
UPE Mini Soc Data Sheet mk2.qxp
25/06/2007
16:33
Page 1
Repair Systems for Water Pipes
The UPE MiniSoc Repair Collar is designed for fast and efficient
repair of spigot and socket joints on metric PVC pipes, giving significant savings in time, labour and material costs.
Repair Fittings for PVC
Socket and Spigot Joints
Benefits
Repairs metric PVC socket joints
Quick and efficient installation
Removes the disruption, possible
contamination and costs involved
in replacing leaking joints with two
connections
Designed for all potable water
applications up to a working
pressure of 7bar
Retained bolts for ease of fitment
Can be installed without shutting
down the main
Minimal on-site excavation needed
General application
Technical data
Pressures
Water:
Temperature:
Working
7 bar
Test
11 bar
Up to 40°C
Temperature increases may affect the installed life of
the product. For further information relating to operating
temperatures please contact the UPE customer service
department at the telephone number shown below.
Fitting Instructions
Separate the fitting. Place the half with the
bolts under the damaged connection.
Place the other half on top of the connection, locating the bolts through the four
holes. Loosely fit and hand tighten the nuts
and washers.
Ensure that the two halves line up and are
securely located round the pipe. Tighten the
bolts further to a torque of between 30 and
40Nm, in a diametrically opposing
sequence.
Tightening Sequence
1
4
3
2
Material:
Body:
Ductile Iron
Sealing Gasket: EPDM
Coating:
Bitumen
(alternative coatings available on request)
Fasteners:
Mild steel Steel to BS 4399
Zinc/Yellow Pasivated
Safety
As with all industrial products it is important
to take adequate safety precautions such as
the use of adequate protective clothing like
gloves, overalls, eye protection and safety
footwear during installation, use and maintenance.
The UPE MiniSoc Repair Collar can be used
to effectively repair spigot and socket joints
damaged by misalignment due to ground
movement, cracked or broken sockets or displaced or damaged seals. Once installed the
collar is designed to allow for angular movement, avoiding any further damage to the
pipe and also increases the end load resistance of the original connection.
The UPE MiniSoc Repair Collar fully encapsulates the damaged joint for a secure and
permanent repair and is designed for all
potable water and waste water applications
up to a working pressure of 7 bar.
A resilient and corrosion resistant protective
coating enhances the life span of the fitting.
Technical help
For further technical data, product specifications
and general information please contact the UPE
Customer Service Department at the telephone
number shown below.
Dimensions and Details
Nominal
Pipe Size
63mm
90mm
110mm
Length
130mm
159mm
166mm
Width
160mm
220mm
235mm
Height
125mm
160mm
170mm
Tel: +44 (0)1675 437 900
e-mail: wwinfo@tyco-valves.com
Number
of Bolts
4
4
4
Size
of Bolts
M12 x 60
M16 x 80
M16 x 80
Weight
Kg
2.9
5.9
6.2
Fax: +44 (0)1675 437 909
www.tycowaterworks.com