Atplas Boundary Box0 pages
Atplas Boundary Box mk2.qxp
21/06/2007
15:10
Page 1
Atplas Below Ground Boundary Boxes
Below Ground
Boundary Boxes
Benefits
The flexibility of the Atplas range
of boundary boxes provides a
variety of options, from sealed or
un-sealed to screwdown or 1/4
turn control valves
The Atplas range of below ground meter boxes are products
that are buried, usually in pavements and walk ways.
The chamber houses the meter in an easily accessible and
safe environment that house holders or meter readers can
have easy and quick access to for meter reading or service
shut off. Alternatively Atplas Boundary Boxes can be used as
a shut off device with the option to fit a meter at a later date.
Available as a short version for use
in shallow service situations
Standard push fit connections suit
PE pipe and 3/4” female threaded
connections for use with male
threaded fittings means that
almost any type of service pipe
can be catered for
The robust plastic surface box has a
load bearing capacity of over 30 kN
The removable square surface box
flange aids back filling and can be
rotated through 360° to make
final alignment with paving
materials easy. If needed a round
surface box profile can be supplied
to suit other surface materials
Up to 8° tilt and 30mm of final
height adjustment on the surface
box allows for easy and accurate
alignment with surface levels and
gradients
Excellent visibility and access to
both the meter and control valve is
provided by the surface box lid
Fully designed and tested to WIS
specifications
Technical data
General application
Sizes:
Connections
The Atplas range of below ground boundary
boxes has been designed and manufactured
to comply with Water Industry Specification
No. 4-37-01 and BS5834 Part 2.
25mm & 32mm metric options for PE pipe
3/4” female threaded option
Height adjustment
Standard Box: 505mm to 830mm
Double Box:
550mm to 870mm
Short Box:
270mm to 385mm
The above dimensions Include 30mm of final height
adjustment in the surface box
Dimensions are taken from the centre of the inlet pipe
to the top of the surface box flange
Multi Manifold (4 and 6 port units):
Telescopic sliding head with 70mm of height
adjustment and 6° of long and 3° of short tilt.
Additional chamber sections can be supplied
to increase the height of the unit:
Short unit: 90mm Long unit: 180mm
The minimum height of the manifold system is 700mm
Standards
Loading:
Watertight:
BS5834 Part 2 Grade C
4-37-01 class 1 (where applicable)
Valve Type 1/4 turn or Screw Down
NRV
Single (duel check valve also available)
Material:
Acetal, Polypropylene, DMC or SMC
Additional Components:
Meter Blanking Plugs:
Full Flow (white), Trickle Flow (yellow) and
No Flow (red).
Tools: A range of tools are available to aid
meter fitment and unit maintenance.
Spares: A full range of spares are available.
Tel: +44 (0)1675 437 900
e-mail: wwinfo@tyco-valves.com
The materials used in the Atplas product that
come into contact with water have WRAS
approval and the range has been submitted
for 3rd party approval by the WRAS.
The range is designed for an asset life in
excess of 50 years subject to normal
operating and maintenance conditions and
as with all Tyco Waterworks products it is
manufactured in an ISO 9001 quality
assured environment.
Safety
As with all industrial products it is important
to take adequate safety precautions such
as the use of adequate protective clothing
like gloves, overalls, eye protection and
safety footwear during installation, use and
maintenance of this product.
Technical help
For further technical data, product specifications
and general information please contact our
Customer Service Department at the telephone
number shown below.
Fax: +44 (0)1675 437 909
www.tycowaterworks.com