Equilibrium Float Valves0 pages
EBCO Float Valves.qxp
25/06/2007
14:43
Page 1
Equilibrium Float Valves
Mark 1 and 2
Equilibrium Float Valves
for Water Services
Benefits
Available in full or reduced bore
configurations to suit pressures up
to 10 bar (150psi) whilst still
maintaining a fast, quiet and
smooth shut off action.
The range of EBCO high flow rate Float Valves are simple and
robust and can reliably self-compensate for changes in water
supply pressures. One size of seat and one size of ball float will
suit any working pressure up to the maximum recommendation
of 10bar (150psi) for the reduced bore float valve or 5bar
(72psi) for the full bore float valve. Even at these pressures the
full bore or reduced bore seat combined with the hydraulically
balanced closing action gives fast, quiet and smooth shut-off.
Valves are available in 1/2” to 6” sizes with BSP male threaded
or flanged inlets.
Available with flanged or male BSP
threaded connections to suit most
connection situations.
The body of the valve is made from
corrosion immune Gunmetal giving
years of trouble free service.
Design and selection of materials
gives high strength for installation
and operation, and corrosion
resistance for long life.
One size of seat and one size of
ball float suits any working
pressure up to the maximum
recommended of 5 bar (72psi) for
the full bore valve or 10 bar
(150psi) for the reduced bore valve.
Technical data
Mark 1
Pressures:
(Full Bore)
Working: 5bar (72psi)
Test (Max): 10bar (150psi)
Equilibrium Float Valve
(Flanged Inlet)
Body
Integral full bore seat gives full high flow rates
Mark 2
Pressures:
(Reduced Bore)
Working: 10bar (150psi)
Test (Max): 20bar (300psi)
Inlet
The pressures stated above apply with water
temperatures up to 20°C
Temperature (Mark 1 and 2)
Up to 65°
Temperature increases may affect the installed life of
the product. For further information relating to operating
temperatures please contact our customer service
department at the telephone number shown below.
Materials (Mark 1 and 2)
Body:
Lever arm:
Lever arm claw:
Ball Float:
Back nut:
Gunmetal
DZR Brass
Gunmetal
Copper
Plastic, Brass or Gunmetal
Lever Arm
Outlet
Equilibrium Float Valve
(BSP Male Threaded Inlet)
Safety
Technical help
For further technical data, product specifications
and general information please contact our
Customer Service Department at the telephone
number shown below.
As with all industrial products it is important
to take adequate safety precautions such
as the use of adequate protective clothing
like gloves, overalls, eye protection and
safety footwear during installation, use and
maintenance of this product.
Tel: +44 (0)1675 437 900
e-mail: wwinfo@tyco-valves.com
Flange
Face
Body
Inlet
Lever Arm
Outlet
Back nut
Fax: +44 (0)1675 437 909
www.tycowaterworks.com