EBCO MBB 0704 Boundary Box0 pages
EBCO MBB 0704 Boundary Box.qxp
20/06/2007
16:25
Page 1
EBCO Below Ground Boundary Boxes
Boundary Boxes
Below Ground Boundary
Boxes
Benefits
EBCO supply an extensive range of Boundary Box designs to
suit almost all utility, installer, operator and consumer needs.
Within this range is a selection of products designed for
use with 1/2” Irish Heavy Gauge pipe. These units suit 1.5”
concentric meters and have a manifold made from engineering
plastic. These products are robust and easy to install, operate
and maintain and are designed to provide many years of
trouble free use and operation.
Non-Telescopic, Base Pattern, 2” Concentric Meter Unit.
Available with EBCO Push Fit inlets for 32mm PE Pipe or
1” female threaded connections.
Exceeds the requirements of
BS5834 part 2 class ‘C’ load
bearing
The 200mm diameter white guard
tube provides good access and
high visibility of the meter and
control valve making installation,
operation and meter reading
simple
The fixed height guard tube can be
cut to the desired height on site
ensuring precise final height
adjustment
The 1/2” EBCO Push Fit
connections for Irish Heavy Gauge
PE pipe makes installation an easy
operation.
EBCO Boundary Boxes are designed for
an asset life in excess of 50 years subject
to normal operating and maintenance
conditions.
Technical data
General application
General Sizes:
EBCO Below Ground Boundary Boxes
provide an easy to install, operate and
maintain connection point between the
mains water supply and the consumer
property. This point may be used for associated
functions other than meter mounting such
as filtration, pressure regulation or leak
detection.
Amongst the range of EBCO Boundary
Boxes is a range of products to suit Irish
heavy gauge pipe. Each of these units is
supplied with a 200mm diameter x 600mm
high PVC guard tube that can be cut to the
exact desired length by the installer whilst on
site. Units are unsealed and are supplied
with plastic manifold units with plastic full
flow caps
1/4 turn valve operation
Plastic manifold material.
Un-sealed chambers
EBCO Push Fit connections for 1/2” Irish
heavy gauge PE pipe
With or without Surface Boxe
Height:
600mm fixed height PVC guard
tube cut to length on site to meet
exact customer requirements
Internal aperture: 200mm
1 2” Irish heavy gauge PE pipe
Inlet/Outlet:
/
Accessories
Meter Raiser
This unit is designed to make meter
reading easier and more convenient
especially in areas with a high water table.
These units are simply screwed into the
meter manifold in place of the meter
and the meter is then screwed into the
other end, effectively lifting the meter by
350mm within the chamber.
Filter Housings
These units link the manifold and the
meter and provide a housing for a filter.
When fitted with a suitable filter these
units filter the water supply before it
reaches the meter and consumer. Filter
housings are available in 350mm or
200mm version.
Top Hat and Surface Box
For ease of installation EBCO can supply
top hats and plastic surface boxes
combined as a ready assembled unit.
These items are securely attached to
each other making installation easy.
Material:
Guard Tube:
Manifold:
Base Module:
Blanking Cap
uPVC
Acetal
Polypropylene
Acetal no flow cap
Standards
Loading:
Exceeds the requirements of
BS5834 Part 2 Grade C
Check Valves: Single check valve as standard.
Insulation:
30mm thick in accordance with
WIS 4.37.01
Meter Types - Concentric
Industry standard, end fitting G 1.5” threaded
(concentric) meters up to Qn 2.5m3/hour.
All EBCO Boxes conform to WIS 4-37-01
and fully meet the requirements of the WRc
and regulation 25. In addition all materials
used with the EBCO range of below ground
Boundary Boxes are WRAS listed.
Safety
For further general information, technical data
and product specifications please contact our
Customer Service Team at the telephone
number shown below.
As with all industrial products it is important
to take adequate safety precautions such
as the use of adequate protective clothing
like gloves, overalls, eye protection and
safety footwear during installation, use and
maintenance of this product.
Tel: +44 (0)1675 437 900
Fax: +44 (0)1675 437 909
Technical help
e-mail: wwinfo@tyco-valves.com
www.tycowaterworks.com
"