Talbot - Fittings for Water Pipe0 pages
Talbot Grippa Universal Service Adaptor.qxp
22/06/2007
15:39
Page 1
Talbot
Talbot
Service Fittings for
Water Pipe
- Fittings for Water Pipe
Talbot Grippa is a universal fitting that connects onto a wide
variety of existing lead, galvanised iron and copper pipe with
just one set of internal components. The range consists of
three fittings which together suit all metal pipes with an
outside diameter of 15mm (3/8") to 34mm (3/4") including the
different weights of lead
Benefits
One fitting securely connects onto
lead, copper and galvanised iron
service pipe
Simple to install, with no loose
assembly of components or
special preparation of the pipe
Just three fittings cover the
majority of lead, copper and
galvanised iron pipe sizes, so
dramatically reducing stock
holdings
The PE pipe will burst or fail before
the Grippa fitting does
Each fitting covers a range of pipe
diameters with no change of
components
Technical data
General application
Pressures:
Extensive research into the usage of nonplastic pipe for domestic water supplies has
enabled Talbot to develop a versatile and
flexible concept in service pipe connections.
Range:
Working: 16 bar Test: 24 bar
The pressures stated above apply with water
temperatures up to 20°C
Temperature: Up to 40°
For further information relating to operating
temperatures please contact our customer service
department at the telephone number shown below.
Meets the applicable performance
requirements of:
WRAS.
ISO 3458, 3459, 3501, 3503
DIN 8076
WIS 4-23-04, WIS 4-32-11
KIWA BRL 534/03
Australian Standard AS/NZS 4129
BS EN 1254-3-1998
Gastec Approval Requirement No. 70
Suits pipe to the following specifications:
PE end:
BS 1972, BS 3284
DIN 8072, DIN 8074, all series
BS 6572, BS 6730
ISO 161 Parts 1 & 11
AWWA C901-78 PE tubing
WIS 4-32-03
ASTM - D2737 PE tubing
WIS 4-32-13
Metallic end:
Suits any metallic pipe from 15mm to 34mm OD
Tel: +44 (0)1675 437 900
e-mail: wwinfo@tyco-valves.com
Grippa 3/8" - 15mm to 21mm metallic pipe
Grippa 1/2" - 21mm to 27mm metallic pipe
Grippa 3/4" - 27mm to 34mm metallic pipe
Each of the above is available to connect to:
20mm (1/2") or 25mm (3/4") PE pipe
The Talbot Grippa combines the tried and
tested Pushfit connection with revolutionary
new technology.
The ‘Universal’ connection of the Grippa
fitting utilises a patented adjusting grip ring
and seal. These two components allow a
watertight, end load resistant connection to
be made without special preparation of the
pipe or the fitting, over a wide range of pipe
diameters.
Technical help
For further technical data, product specifications
and general information please contact our
Customer Service Department at the telephone
number shown below.
Fax: +44 (0)1675 437 909
www.tycowaterworks.com