UPE Fasteners and Flange Gasket Sets0 pages
UPE Fasteners and Flange Gaskets.qxp
18/06/2007
09:41
Page 1
Fasteners and Flange Gasket Sets
The UPE range of flange bolt sets is extensive and can be
tailored to suit customers’ exact needs.
Fasteners and Flange Gasket
Sets for the Water, Gas and
Municipal Industries.
UPE offer complete flange gasket sets consisting of a gasket
and the appropriate number of fasteners for the size of flange.
These flange gasket sets are supplied bagged and clearly
labelled enabling the correct gasket with the correct size and
number of bolts, nuts and washers to be selected every time a
connection is to be made.
Benefits
Factory applied protection, no
need to pack and wrap joints and
fittings after installation
All bolts, nuts and washers are
fully coated, no exposed or
unprotected metal areas
Exceptional long-term corrosion
protection
Meets the standards of
WIS 4:52:03
Flange gasket sets provide the
gasket and correct quantity and
size of bolts, nuts and washers for
each application ensuring correct
fitment every time
Extensive stocks of standard
Flange Bolt Sets are available
providing short lead times and
high levels of customer service
Non-standard materials, coatings
and sizes are available on request
Technical data
General application
Material
The UPE range of fasteners have been
developed to meet the requirements of the
water, gas and municipal industries.
The protective coating offers all the benefits
of a combination of a substantial sacrificial
protection layer and a barrier layer. Both
these layers combine to withstand exposure
to the most extreme of environments.
Bolts:
Nuts:
Mild steel, grade 4.6
Mild steel, grade 4.6
Washers: Mild steel, grade 4.6
Alternative grades and materials are available on request
Gaskets
Water:
Gas:
EPDM EN681
Nitrile EN682
For pressures exceeding NP25 a ‘ceramic’ gasket can be
supplied. Please contact the UPE Customer Service Team
on the number shown below for further details
Coating:
Sheraplex
Sheraplex is a duplex process Stage 1: Sherardized layer
(Average coating to 30μm)
Stage 2:
Inorganic barrier layer
(Average coating to 12μm)
Combined: Sheraplex coating
(Average coating to 42μm)
Sizes
Bolts:
M10 to M 56
In lengths 25mm to 300mm
Gaskets: Full face, 2 lug and IBC
In sizes 50mm to 2,200mm
For further technical data, product specifications
and general information please contact our
Customer Service Department at the telephone
number shown below.
Gaskets
UPE offer three types of gasket pattern:
Full Face,
2 Lug,
IBC
As with all industrial products it is important
to take adequate safety precautions such
as the use of adequate protective clothing
like gloves, overalls, eye protection and
safety footwear during installation, use and
maintenance of this product.
Other special gaskets can be supplied to
exact customer requirements.
All gaskets are supplied in either EPDM or
Nitrile rubber to a thickness of 3mm and are
available as BS4504 (closed bore) and
BS4865 (open bore). All EPDM gaskets
supplied are fully WRAS approved for
contact with potable water and conform to
the requirements of BS2494.
Tel: +44 (0)1675 437 900
Fax: +44 (0)1675 437 909
Safety
Technical help
Fasteners
Bolts, nuts and washers are supplied in steel
to grade 4.6 as standard with the option of
alternative grades and materials available on
request. The duplex coating process consists
of a Sherardized layer to an average thickness
of 30μm and a subsequent Inorganic barrier
to a thickness of12μm. This approved coating
meets the requirement of WIS 4-52-03.
e-mail: wwinfo@tyco-valves.com
www.tycowaterworks.com
"