DSE7310-200 pages

® DSECONTROL®
MONITORING
WITH
INTELLIGENCE.
The DSE7310 and DSE7320 are
control modules for single gen-set
applications. The modules have
been developed from the
successful DSE5310 and DSE5320
Series and incorporate a number
of advanced features to meet the
most demanding on-site
applications.
The DSE7310 is an Automatic Start
Control Module and the DSE7320
is an Auto Mains (Utility) Failure
Control Module. Both modules
have been designed to start and
stop diesel and gas generating
sets that include electronic and
non-electronic engines. The
DSE7320 includes the additional
capability of being able tomonitor
a mains (utility) supply.
Both modules include USB, RS232
and RS485 ports as well as
dedicated DSENet® terminals for
expansion device connectivity.
The modules are simple to
operate and feature a userfriendly
menu layout for improved
clarity. Enhanced features include
a real time clock for enhanced
event and performance
monitoring, ethernet
communications for low cost
monitoring, mutual standby
(DSE7310 only) to reduce engine
wear and tear and preventative
maintenance features to detect
engine part faults prior to a major
problem occurring.
FEATURES
• Backed up real time clock
• 132 x 64 pixel LCD display
• Configurable display languages
• Five-key menu navigation
• Fully configurable via PC software
• LED and LCD alarm indication
• Engine exercise mode
• Configurable start & fuel outputs
• kWh monitoring
• Automatic load transfer
• Eight configurable digital inputs
• Six configurable outputs
• Configurable timers and alarms
• Modbus RTU
• Magnetic pick-up
• Selected front panel programming
• Multiple date and time exercise
scheduler
• SMS messaging (additional
external modem required)
• Power save mode
• User selectable RS232 & RS485
communications
• DSENet® compatible
• Ethernet communications via
DSE860/865
• Multiple date and time
maintenance scheduler
• Configurable display pages
• Programmable load
shedding/acceptance
• Preventative maintenance
• kW overload protection
• Unbalanced load protection
• Flexible sender input
• Configurable SCADA output page
• True dual mutual standby with load
balancing timer (DSE7310 only)
• Fan control for additional cooling
• ‘Protections Disabled’ facility
• Fuel usage monitoring and low
fuel alarm
• Support for up to three remote
display units
• Automatic sleep mode
• Easy access, configurable
diagnostics page shows summary
of output states
• Improved programmable event log
(250) showing date and time
• Manual fuel pump control
• 3 alternative configurations
• Multiple date and time scheduler
• 3 Programmable Maintenance
alarms with comms alert
• Customisable status screens
• Low fuel level alarm delay
• Charge alternator fail warning and
shutdown alarms with user
programmable delay
• Independent Earth fault trip
• Sleep mode
• Load switching (Load shedding
and dummy load outputs)
• Manual speed trim (on CAN
engines that support this feature)
• Additional display screens to help
with modem diagnostics
• Security levels – PC software has
password system to control
access to PC software features
• Operator configurable virtual LEDs
visible in SCADA
NEWFEATURES
• Additional programmable logic
• Improved modem diagnostics
• Remote control sources (10) can
be accessed via SCADA
• Additional electrical trip options
• Additional start delay functions
• Oil pressure values from additional
engines
• Front panel editing of scheduler
• Displays kW as % of rated kW
setting
DSE7310 & DSE7320
AUTO START & AUTOMAINS FAILURE CONTROLMODULES (COMMUNICATIONS & EXPANSION)
SPECIFICATION
DC SUPPLY
ALTERNATOR INPUT
MAINS/UTILITY INPUT (DSE7320 ONLY)
CONTINUOUS VOLTAGE RATING
8V to 35V Continuous
CRANKING DIP PROTECTION
Able to survive 0V for 50mS, providing supply
was at least 10V before dropout and supply
recovers to 5V. This is achieved without the need
for internal batteries
CHARGE FAIL/ EXCITATION
0V to 35V fixed power source 2.5W
MAXIMUM STANDBY CURRENT
160mA at 12V 80mA at 24V
MAXIMUM OPERATING CURRENT
340mA at 12V 160mA at 24V
RANGE
15V - 333V (L-N) 50Hz - 60Hz
(Minimum 15V AC Ph-N)
ACCURACY
1% of full scale true RMS sensing
SUPPORTED TOPOLOGIES
3 phase 4 wire
3 phase 3 wire
3 phase 4 wire Delta
Single phase 2 wire
2 phase 3 wire L1 & L2
2 phase 3 wire L1 & L3
RANGE
15V - 333V (L-N) 50Hz - 60Hz
(Minimum 15V AC Ph-N)
ACCURACY
1% of full scale true RMS sensing
SUPPORTED TOPOLOGIES
3 phase 4 wire
3 phase 3 wire
3 phase 4 wire Delta
Single phase 2 wire
2 phase 3 wire L1 & L2
2 phase 3 wire L1 & L3
CT’S
BURDEN
0.5VA
PRIMARY RATING
1A - 8000A (user selectable)
SECONDARY RATING
1A or 5A secondary (user selectable)
ACCURACY OFMEASUREMENT
1% of full load rating
RECOMMENDATIONS
Class 1 required for instrumentation
Protection class required if using for protection
Continued on page 2