DSE710-7200 pages

® DSEULTRA®
STARTING
WITH
QUALITY. SPECIFICATION
ENVIRONMENTAL TESTING
STANDARDS
The DSE710 is an Automatic
Start ControlModule that offers
an advanced range of engine
monitoring and protection
features. The module has been
designed tomonitor generator
frequency, generator volts,
generator current, engine oil
pressure, engine coolant
temperature, engine running
hours and battery volts.
The module also displays the
engine speed.When the module
detects a fault condition it
automatically shuts down the
engine and indicates the exact
fault on the modules LCD display
or relevant LED indicator.
The module can be configured
using the front panel or via the
DSE810 interface and a PC. The
module can also be controlled
from a PC that is located up to
100meters away.
The DSE720 is an Automatic
Mains Failure ControlModule
and incorporates all the features
of the DSE710 plus the ability to
automaticallymonitor the mains
supply and switch over to the
generator when the mains
power fails.
FEATURES
• PC configurable
• Digital and analogue inputs
• Digital outputs
• Automatic mains (utility) supply
monitoring (DSE720 only)
• Automatic shutdown or warning
when fault conditions are detected
• Manual start
• Engine pre-heat
• Engine monitoring and protection
features
• Protected Solid State (PSS)
outputs
• Front panel mounting
• Front panel programming
• Tamper proof engine hours
counter
• Remote start
• LED indicators
• Configurable timers
• Configurable outputs
• Configurable inputs
• Back-lit character/icon LCD
display
BENEFITS
• Transfer between mains (utility)
and generator power (DSE720
only)
• On-site module configuration and
remote configuration (Max 100
Meters) using PC software
• User-friendly set-up and button
layout
• Multiple engine parameters are
monitored simultaneously
• License free PC software
OPERATION
The module is operated using
the front STOP/RESET, MANUAL,
AUTO, TEST and START push
buttons.
An additional push button next to
the LCD display is used to scroll
through the modules’ metering
displays.
CONFIGURATION
The modules can be configured using
the front panel or remotely using the
DSE810 interface and a PC.
As well as configuration the DSE810
interface has the ability to provide
real time diagnostic facilities.
ELECTROMAGNETIC CAPABILITY
BS EN 61000-6-2
EMC Generic Emission Standard for the
Industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for the
Industrial Environment
ELECTRICAL SAFETY
BS EN 60950
Safety of Information Technology Equipment,
including Electrical Business Equipment
TEMPERATURE
BS EN 60068-2-2
Test Ab to +70oC 60067-2-2 Hot
Test Ab to -30oC 60068-2-1 Cold
VIBRATION
BS EN 60068-2-6
Ten sweeps in each of three major axes
5Hz to 8Hz @ +/-7.5mm, 8Hz to 500Hz @ 2gn
HUMIDITY
BS 2011 part 2.1 60068-2-30
Test Cb Ob Cyclic
93% RH @ 40oC for 48 hours
SHOCK
BS EN 60068-2-27
Three shocks in each of three major axes
15gn in 11mS
DC SUPPLY
8V to 35V continuous
CRANKING DROPOUTS
Able to survive 0V for 50mS, providing supply
was at least 10V before dropout and supply
recovers to 5V. This is achieved without the
need for internal batteries.
MAXIMUMOPERATING CURRENT
180mA at 12V. 190mA at 24V
MAXIMUMSTANDBY CURRENT
145mA at 12V. 150mA at 24V
GENERATOR INPUT RANGE
35V(L-N) to 333V AC (L-N) absolute maximum
50Hz - 60Hz (min 15V AC)
AUXILIARY OUTPUTS
Solid state
2.4A DC at supply voltage
FUEL/START OUTPUTS
Solid state
3.4A DC at supply voltage
GENERATOR C.T.
5A secondary 0.5VA
MAINS (UTILITY) SENSING INPUT
RANGE(DSE720 only)
35V(L-N) to 333V AC (L-N)
50Hz - 60Hz (min 15V AC)
DSE710 & DSE720 DIMENSIONS
209mm x 146mm x 30.3mm
8.2” x 5.7” x 1.2”
DSE710 & DSE720 PANEL CUTOUT:
182mm x 137mm
7.2” x 5.4”
MAXIMUMPANEL THICKNESS
8mm
0.3”
DSE710 & DSE720
AUTO START & AUTOMAINS FAILURE CONTROLMODULES
DSE710 DSE720