dse87000 pages

®

DSEGenset

DSE8700 LOAD SHARE MODULES
SERIES
REAR MOUNTED

ENVIRONMENTAL TESTING STANDARDS
ELECTRO MAGNETIC COMPATIBILITY
BS EN 61000-6-2
EMC Generic Immunity Standard for the
Industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for the
Industrial Environment

Used in conjunction with DSE remote displays

FEATURES

ELECTRICAL SAFETY
BS EN 60950
Safety of Information Technology Equipment,
including Electrical Business Equipment

The DSE8700 is an easy to use
multi-generator loadshare system,
designed to synchronise up to 32
generators including electronic and
non-electronic engines.
The module is available in 2 variants:
• DSE8710 Auto Start (this can
also be programmed as a
DSE8760 Auto Mains Controller)
• DSE8760 ATS/Auto Mains
Controller (this can also be
programmed as a DSE8710
Auto Start Controller)
The modules are designed to work
with independent front display
screens which are connected via a
data link up to a maximum
distance of 1km. These must be
ordered as a separate item.
The DSE8700 Series monitors the
system and indicates operational

status and fault conditions,
automatically starting or stopping
the engine on load demand or fault
condition.

With all communication ports
capable of being active at the
same time, the DSE8700 Series is
ideal for a wide variety of
demanding load share
applications.

System alarms are annunciated on
the independent front screens,
illuminated LEDs and audible
sounder.

TEMPERATURE
BS EN 60068-2-1
Ab/Ae Cold Test -30oC
BS EN 60068-2-2
Bb/Be Dry Heat +70oC
VIBRATION
BS EN 60068-2-6
Ten sweeps in each of three major axes
5Hz to 8Hz @ +/-7.5mm, 8Hz to 500Hz @ 2gn

KEY LOAD SHARE FEATURES:
• Peak lopping
• Sequential set start
• Manual voltage/frequency
adjustment
• R.O.C.O.F. and vector shift
• Generator load demand
• Automatic hours run balancing
• Mains (Utility) de-coupling
• Dead bus sensing
• Mains (Utility) de-coupling
test mode
• Bus failure detection
• Direct governor and AVR
connections/controls
• Volts and frequency matching
• kW and kV Ar load sharing.

The event log will record 250 events
to facilitate easy maintenance. An
extensive number of fixed and
flexible monitoring, metering and
protection features are included
as well as sophisticated
communication and system
expansion options.
Using the DSE PC Configuration
Suite Software allows easy
alteration of the operational
sequences, timers and alarms.

HUMIDITY
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55oC @ 95% RH
48 Hours
BS EN 60068-2-78
Cab Damp Heat Static 40oC @ 93% RH
48 Hours
SHOCK
BS EN 60068-2-27
Three shocks in each of three major axes
15gn in 11mS

COMPREHENSIVE FEATURE LIST TO SUIT A WIDE
VARIETY OF LOAD SHARE APPLICATIONS
MODEM

DSE2130
DSE2157
DSE2548

MODBUS

PC
11

232

DSENET
EXPANSION

4

485

RS232 AND
RS485

®

6

DSE8721
DSE871x

USB USB
PORT HOST

CONFIGURABLE

INPUTS

DC
OUTPUTS

ETHERNET

ANALOGUE
SENDERS

EMERGENCY
STOP

+

DSE8700

DEUTZ
ISUZU
PERKINS
CATERPILLAR
MTU
VOLVO
CUMMINS
SCANIA

MSC

7

8710

8710

8760

OTHER

BUS
SENSING

VOLT FREE
OUTPUTS

GENERATOR SENSING
CURRENT

FUEL & CRANK
OUTPUTS
VOLTS
+

1ph
2ph
3ph
N

2

DC POWER
DISPLAY
SUPPLY 8-35V SCREENS

1ph
2ph
3ph
N

CHARGE
ALTERNATOR

ELECTRONIC
ENGINES

MAGNETIC
PICK-UP

D+
W/L

1ph
2ph
3ph
N

ISSUE 2