Stack type actuator series PHL0 pages

series PHL
stack type actuators
concept:
The actuators of the series PHL are based on stack
type actuators built up in multilayer technique.
Based on the large ceramic size, the PHL series of
actuators have high blocking forces in the kilo-N
range. This feature enables the PHL series to move
large masses and generate high forces. Therefore
they are ideally suitable for applications in the
machine tool industry.

specials:

image: series PHL

The resolution PHL series is in the sub-nanometer
range and is only limited by the control signal

product highlights:

noise.
These actuators are not preloaded and therefore
not suitable for dynamic applications.

mounting:
Actuators should only be fastened with screws or
clamps on the bottom plate of the actuator.
During the installation and use, it is important not
to subject the actuator tip to non axial forces.
Actuators without pre-load are not suitable for
dynamic applications.

stack type actuators in multilayer
technique
without mechanical pre-load
motion up to 103 µm
(larger motions available upon request)
high stiffness up to 175 N/µm
blocking force up to 3500 N
applications:
micro positioning of heavy loads
laser and mirror movement
beam adjustment
laser tuning
nanotechnology
micro lithography

Tel: +49 (3641) 66880 • Fax: +49 (3641) 668866
info@piezosystem.com • http://www.piezosystem.de
PHL_ds_2013-10-21.doc