Stack type actuators series P/S0 pages

P/S Series
Stack type actuators
Concept:
The actuators of the P/S series are based on
multilayer stack type actuators without lever
transmission. Depending on the model, actuators
are available with a stroke of 18 µm up to 70 µm.
They have a hermetically sealed housing. The
special housing allows for the use in aggressive
and humid environments. Due to the hermetic
insulation, a longer lifetime is achieved.
Image: P/S Series

Specials:
The P/S series actuators are only pre-loaded by
the housing. These actuators can handle,
depending on the ceramic size, loads up to 3400
N. The construction of the housing tightly
encloses the stack, thereby avoiding any
mechanical play.

Interfaces:
The M3 thread in the bottom plate allows for easy
adaptation into existing systems and guarantees
exact positioning. The spanner flats on the bottom
plate can also be used for mounting. During
installation and use, it is important not to subject
the actuator tip to non-axial forces.

Product highlights:
hermetic insulated stack type actuator
applications in aggressive and humid
environments (up to IP68)
integrated mechanical pre-load
very small and compact design
motion up to 70 µm
high stiffness up to 189 N/µm
Applications:
use under very special conditions
valve technology
automatization

Tel: +49 (3641) 66880 • U.S. (+1) 508 634 6688
info@piezojena.com • http://www.piezosystem.com
P-S_ds_Rev04_2012_06_29.doc