DG1000 pages

24 25
Dimensions
MG
• High accuracy: 4 ìm
• Resolution: 0.5 ìm • Measuring range: 110 mm / 4.33" • Reduced measurement error
• Precision dual spindle support allows for a smooth spindle motion and virtually error free measurements.
• Reduced measuring force
The measuring force can be reduced to a minimum of 0.3 N in three selectable steps using the measuring
balancer (option). The force is maintained constant regardless of spindle movement direction.
• Soft spindle return. A braking mechanism reduces spindle return speed, therby eliminating
the danger of damaging either the surface plate or the workpiece.
Digital Gauge
DG DG110B Series
*1 excl. cable unit and Interpolator unit. *2 The measurement force values given apply when DZ-581 measuring force balancer is not used.
By using a measuring force balancer (option), it is possible to reduce the measuring force to minimum of 0.3 N.The measuring force will be constant regardless of spindle position.
Type
Measuring range
Resolution
Measuring range force
Accuracy
Operating temperature
Storage temperature
Cable length
Mounting stem diameter
Feeler
Mass*1
Lift lever
Model DG110B/BM/BE
For Counter, A/B quadrature signal output type (See Page 26)
110 mm/ 4.33"
0.5 ìm
Downward 1.55 ± 0.15 N*2
4 ìm
0 °C to 50 °C / 32 °F to 122 °F
-10 °C to 60 °C / 14 °F to 140 °F
2 m/ 6.56'
ø 20 mm/ø0.78"
Feeler tipped with ø 2.5 mm/ 0.098" dia. Carbide ball with M2.5p x 0.45 screw on fitting end (DZ-121)
Approx.1150 g/ 2.54 lbs
DZ-161 (supplied)
0
-0.03
0"
-0.0012"
Unit : mm/inch
ø29
ø5.8/ø0.23
ø2.5/ø0.1 hole
ø4/ø0.16
28/1.1 34.5/1.36
ø20/ø0.79
(31/1.22)
Cable length 2000/78.7
,
Cable length
300/11.81
(101/3.98)
(112/4.41) 314/12.36
489.5/19.27
-0.1
0
/ø1.14
(stem)
-0.004
0
ø20 -0.03
0
/ø0.79 -0.001
0
(27/1.06)
ø5.7/ø0.22
40/1.57 3/0.12
ø8/ø0.31
12/0.47 8.5/0.33
Thickness 21/0.83
Specifications
High accuracy gauge with controllable measuring force
*Digital gauge stand DZ-531 and Measuring force balancer
DZ-581 are option.
DG110B
MG20-DG
LY71,LY72
LT20A
DZ51+SZ70-1
DG50BP/DG50BN
DG100BP/DG100BN
Digital Gauge
DG50BN/BP
ø6
/ø0.24
-0.013
ø20 0
-0.0005
/ø0.79 0
(stem)
-0.003
/ø0.78 0.0008
(stem)
-0.07
ø20 -0.02
12/0.47 51/2.01 44/1.73
223/8.78
286/11.26 (20/0.79)
ø5.8
/ø0.23
0
0
0
/ø1.26-0.002
-0.05
ø32 0
/ø1.26-0.002
ø32-0.05
(20/0.79)
ø5.8
/ø0.23
ø22
/ø0.87
9/0.35
ø8
/ø0.31
28/1.1
(stem)
416/16.38 ~ 571/22.48
407/16.02
DG155BP
-0.004
0
-0.013
0
-0.0005
0
-0.1
0
12/0.47 (20/0.79)
ø5.8
/ø0.23
ø20
/ø0.79
(stem)
ø0.98
ø25
ø8
/ø0.31
(102/4.02)
2.5
/0.1 38.5/1.52
329/12.95
443.5/17.46
DG100BN/BP
Unit : mm/inch
DG205BP
-0.002
/ø1.26 0
-0.05
ø32 0
(20/0.79)
ø5.8
/ø0.23
28/1.1
-0.002
/ø1.26 0
-0.05
ø32 0
(stem)
ø22
/ø0.87
9/0.35
ø8
/ø0.31
516/20.31 ~ 721/28.39
507/19.96
Dimensions
• Excellent resistance to workshop conditions (BP : IP64).
Resistant to oil, water, dust, vibrations. and shocks.
• Accuracy: 2 ìm (DG50BP/50BN), 4 ìm (DG100BP/100BN),
5 ìm (DG155BP), 6 ìm (DG205BP) • Resolution : 0.5 ìm
• Measuring range: 50 mm / 1.97", 100 mm / 3.94",
155 mm / 6.1" and 205 mm / 8.07"
• High measuring force (DG50BP/100BP) • Low measuring force (DG50BN/100BN)
• Magnet feeler (DG155BP/205BP) • Easy installation
• A variety of accessories available (See "Accessories for Gauges")
DG155BP/205BP does not included the spring. *1 excl. cable unit and Interpolator unit *2 Tubing for compressed air can be attached.
Type
Measuring range
Resolution
Accuracy (at 20°C / 68°F)
Maximum Response speed
Operating temperature
Storage temperature
Cable length
Mounting stem diameter
Feeler
Protective design grade
Mass*1
Lift lever
Air lifter
Model
DG50BP
BPM/BPE
Measuring
range force
Oil sealing, O-rings,
Y-gaskets
Oil sealing, O-rings,
Y-gaskets
Attraction force: 10 N(DZ181)
Lateral slippage force: 2.7 N
Sealing (oil, water, dust) Oil sealing, O-rings, Y-gaskets
Magnetic feeler
All direction:
6.2 N or less
All direction :
9.3 N or less
DG50BN
BNM/BNE
DG100BP
BPM/BPE
DG100BN
BNM/BNE
DG155BP
BPM/BPE
DG205BP
BPM/BPE
Upward
Lateral
Downward
50 mm/ 1.97"
2 ìm
carbide ball tipped feeler (DZ-122)
Approx.360 g/ 0.793 lbs
100 mm/ 3.94"
4 ìm
1m/s
carbide ball tipped feeler (DZ-121)
Approx.630 g/ 1.388 lbs
Equivalent to IP64
—
—
1.8 ± 0.65 N
2.7 ± 0.55 N
—
DZ-161 (option)
155 mm/ 6.1"
5 ìm
Approx.1100 g/ 2.425 lbs
205 mm/ 8.07"
6 ìm
Approx.1300 g/ 2.866 lbs
—
0.9 ± 0.4 N
1.3 ± 0.5 N
—
DZ-161 (option)
Equivalent to IP64
—
ø 32 (0/ -0.05) mm/ ø 1.26" (0/ -0.002")
Equivalent to IP 64
DZ-161 (option)
For Counter, A/B quadrature signal output type (See Page 26)
0.5 ìm
0 °C to 50 °C / 32 °F to 122 °F (gauge)
-20 °C to 60 °C / -4 °F to 140 °F
5 m/ 16.4'
ø 20 mm/ ø 0.79"
—
— —
—
—
—
0
-0.013
0
-0.0005"
DZ174-010 (option) —
Specifications
DG DG50B,DG100B,DG155B,DG205BSeries High accuracy, rugged gauges.
Suitable for installation on machines.
DG155BP/DG205BP
DG50/100/155/205 *The photo shows DG155BP
MG20-DG
LY71,LY72
LT20A
DZ51+SZ70-1