Brochure - Mobile Cart for Transpector CPM Systems0 pages
Mobile Cart
for Transpector® CPM Systems
S E L F - C O N TA I NED CART FOR MOBILE
T R O U B L E S H O OTING
The INFICON Mobile Cart system allows any Transpector
CPM (Compact Process Monitor) Gas Analysis System to
become a mobile troubleshooting instrument. The self-contained cart allows the system to be transported from tool to
FEATURES AT A GLANCE
■
tool with the flexibility to adjust to various heights. The
mechanical arm mechanism permits the sampling system to
twist, rotate and move vertically which makes this Mobile
■
Cart perfect for tight production spaces.
The Mobile Cart assembly houses the entire CPM system
including foreline pump, CPM controller, desktop computer/
■
monitor or laptop computer. All of the devices are secured to
the cart making mobility easy. The Mobile Cart comes
equipped with a power strip and connections for compressed
air, nitrogen and exhaust for your CPM. With a slide out
mouse pad and storage compartment, the Mobile Cart com-
■
lexibility – Can move the Transpector CPM close
F
to the tool or vacuum system by moving the CPM
horizontally and vertically, as well as the ability to
rotate the system.
mall Footprint – The open structure of the Mobile
S
Cart along with its “elbow”-like support arm allows
close coupling of the RGA to the tool without taking
up valuable floor space.
omplete System – The Mobile Cart will carry and
C
support the Transpector CPM System and a desktop or laptop computer. It also has a connection
panel for compressed air, nitrogen, exhaust and
power for the CPM system.
vailable in 120 and 230 VAC versions
A
bined with the CPM is truly a mobile diagnostics instrument.
ADVANTAGES OF A MOBILE
SAMPLING SYSTEM
In modern economic times, there is a constant desire to
streamline and reduce costs across the board. Therefore, the
ability to use one RGA instrument to troubleshoot multiple
tools can be very advantageous. The Mobile Cart allows for
this capability. Instead of installing RGAs on every chamber
of a tool, a single CPM can be purchased and mounted on
the Mobile Cart which can be wheeled up and attached with
bellows to any chamber for sampling. For ultimate flexibility,
an atmospheric capillary inlet can be installed in the CPM
which will allow the system to be used anywhere in the facility to check for problems.
MAXIMUM ADJUSTMENTS AND FLEXIBILITY
A scale indicator on the arm support shows the height from
the center of the CPM inlet to the floor. The maximum height
from the floor to the inlet is 48 inches (121.9 cm) and the
minimum height from the floor to the inlet is 36 inches (91.4
cm). This allows the Mobile Cart system to accommodate a
variety of tool connection heights.
The CPM system mounts on a vacuum system plate that
rotates 180°. This plate is mounted at the end of an elbowlike arm. Above the height of the computer, the arm will
swing 180°, and below that height, the arm will swing 90°
away from the PC. This range of motion provides further
flexibility for connecting to tools of various heights and
configurations.