SERIES MH100 - Versatile High Power Supplies0 pages

Sries MH100 VERSATILE HIGH VOLTAGE POWER SUPPLY MODULES FEATURES  100W output power 9 High reliability 镕 24V DC powered  Range of outputs available Օ Positive or negative polarity  Short circuit & flashover protection Remotely controllable Օ V & I control V & I monitor  LED status indication Օ Low ripple  CC marked Voltage Regulation: Line: Less than 0.01% for a 10% change in input voltage. Load: Less than 0.1% for 10% to full load. Current Regulation: Line: Less than 0.01% for a 10% change in input voltage. Load: Less than 0.1% for 10% to full load. Voltage Control: 1 0 to 10V for 0 to rated output voltage, accuracy ±1% of rated voltage. 2 Via remote potentiometer minimum resistance 9kQ. 3 Via internai potentiometer. Current Control: 1 0 to 10V for 0 to rated output current, accuracy ±1% of rated voltage. 2 Via remote potentiometer minimum resistance 9kQ. 3 Via internal potentiometer. Note: Any combination of V and I control may be used. Monitors: Voltage: 0 to 10V ±1% for 0 to rated output voltage. Current: 0 to 10V ±1% for 0 to rated output current. Note: Each monitor has a series output resistor of 1kQ. Temperature Coefficent: 200ppm/°C over-operating temperature range. Stability: ±0.1% over an 8 hour period after 30 minutes warm-up. DESCRIPTION The Series MH100 is a range of versatile high voltage modules suitable for specification in OEM equipment as component power supplies. Powered from 24V DC, these units allow full range control and monitoring of voltage and current via 0-10V analogue signals. In addition, internal potentiometers are provided for voltage and current control. SPECIFICATION Output Power: 100W max output power. Output Voltage: 0 to 50kV depending on model. Output Current: 0 to 20mA depending on model. Input Voltage: +24V DC (±2V DC). Input Current: 6A max. Polarity: Positive or negative to order. Ripple: Less than 0.1% peak to peak. www.hitekpower.com