SERIES IP1000 pages

Sries IP100 ION PUMP POWER SUPPLY FEATURES  115W Output Power 镕 90V to 265V AC Operation  Positive or Negative polarity to order Օ Compact size  Lightweight Օ Protection against output short circuit  Current monitor Օ Interlock DESCRIPTION The Series IP100 is a range of high voltage power supplies designed to drive a vacuum chamber ion pump where a vacuum in the region of 1x10E-11 Torr is required. The Series IP100 is also suitable for use in mass spectrometers, scanning electron microscopes and high integrity vacuum systems. Operation: A mains ON/OFF switch, ENABLED indicator lamp and fuse are provided on the front panel. HV Enable and a Current Monitor are provided via a 9-way D-type connector situated on the rear panel. A current monitor is also provided via 4mm banana sockets. Current Monitors: Fibre optic transmitter: A series of light pulses, where the frequency is directly proportional to the load current over the range 1uA to 2mA. 1mA load gives 30kHz. (Frequency (Hz) = load current x 30E6) ±5%.) 4mm sockets or 9-way D-type (pins 3 or 4): A voltage directly proportional to the load current over the range 1uA to 2mA. (1mA load = 4.7V monitor ±5%.) Remote Enable: The presence of a 24V supply fed remotely enables the supply. Operating Temperature: 10°C to 40°C. Altitude: Sea level to 2000 metres (6500 feet). Humidity: 80%. Assembly: The unit incorporates an air insulated HV assembly to achieve a total weight of less than 1.6kg (3.5 lb). SPECIFICATION Output Power: 115W output at 240V input. Output Voltage: 5kV or 7kV depending on model. Output Current: 80mA max. Input Voltage: 90V to 265V AC. Input Current: 2A max. Polarity: Positive or negative to order. Output Ripple: Less than 30V peak to peak. www.hitekpower.com