SERIES OLS10K0 pages
Series OLS10K
10kW HIGH VOLTAGE POWER SUPPLY
FEATURES
High Packing Density: 10kW output power
in 6U rack mounted chassis
Output voltages from 1kV to 100kV
Parallel option to give 20kW
Exceptional reliability in severe electrical
environments
High Stability
Arc Count and Extinguish (ACE)
Full Local & Remote control and monitoring
Analogue or RS232 remote control
Voltage or current control
RoHS compliant to EU Directive 2002/05/EC
Marked for EU LV Directive 73/23/EEC
DESCRIPTION
The Series OLS10K range of single output high voltage power supplies
meets the exacting requirements found in electron and ion beam
systems, ion implantation and X-ray equipment. There are 3 different
input voltage variants available to order, the OLS10K (208VAC), the
OLS10KC (380VAC) and the OLS10KE (400VAC).
Designed using the latest power switching IGBTs to ensure efficient
and reliable operation over the full operating range, the Series OLS10K
will give exemplary performance in the most severe of electrical
environments. The Series OLS10K achieves an exceptionally high
packing density for high voltage power supplies of this power level,
giving 169W/Litre, 2.7W/inch3. The 6U construction allows operation at
full power when close-mounted in a standard equipment rack, giving
significant savings in rack space in large systems. Featuring HiTek
Power’s unique Arc Count and Extinguish (ACE) system for managing
systems where load arcing is endemic, the Series OLS10K protects
both itself and the load from damage that may be caused by excessive
arcing whilst allowing normal operation to continue. The Series
OLS10K features both analogue and remote control (optional RS232)
interfaces. A full set of commands is available over the optional RS232
interface to control and monitor the operation of the power supply.
SPECIFICATION
Output Power:
10kW maximum at full rated output voltage and current.
Output Voltage:
Units available with maximum output voltages from 1kV to 100kV.
Output Current:
Up to 10A for 1kV and 100mA for 100kV (see table).
Input Voltage:
OLS10K:tt
208VAC ±10% (187VAC to 229VAC) 47-63Hz 3 phase
plus protective earth.
OLS10KC:tt
380VAC ±10% (342VAC to 418VAC) 47-63Hz 3 phase
plus protective earth.
OLS10KE:tt
400VAC ±10% (360VAC to 440VAC) 47-63Hz 3 phase
plus protective earth.
Input Current:
OLS10K:tt
OLS10KC:tt
OLS10KE:tt
Less than 36A per phase.
Less than 22A per phase.
Less than 22A per phase.
Polarity:
Positive or negative to order.
Specification Range:
Specifications apply above 5% of rated output voltage. The output can
be controlled down to less than 0.25% of rated output voltage.
Voltage Ripple:
OLS10K:
Voltage Mode:t
Less than 0.05% of rated voltage +2V, peak to peak
tt
or less than 0.01% of rated voltage +1V, rms.
Current Mode:t
Less than 0.5% of rated voltage peak to peak
tt
or less than 0.1% of rated voltage rms.
w w w. h i t e k p o w e r. c o m
"