SERIES OLS10KD0 pages
Series OLS10KD
10kW HIGH VOLTAGE POWER SUPPLY
FEATURES
Wide Dynamic range with dual supply configuration
Output Voltages from 10kV to 100kV for high range
Output Voltages from 1kV to 10kV for low range
High Packing Density: 10kW output power in 6U
rack mounted chassis
Exceptional reliability in severe electrical
enviroments
High Stability
Arc Count and Extinguish (ACE)
Full Local & Remote control and monitoring
Analogue or RS232 remote control
Voltage or current control
RoHS compliant to EU Directive 2002/95/EC
Marked for EU LV Directive 2006/95/EC
DESCRIPTION
The Series OLS10KD range of high voltage power supplies recognises
the requirement for high stability and very low ripple over a wide
range of output voltages.
This is achieved by combining the high power, 10kW supply with a
low power, 1kW supply in the same chassis. The outputs of these are
coupled together so that either can be used. For high voltages, usually
above 10% of the maximum, the High Energy (HE) supply is used; for
voltages below 10% the Low Energy (LE) supply is used. The LE supply
has superior ripple and regulation at the lower voltages and maintains
this down to a few hundred Volts or less.
The Series OLS10KD meets the exacting requirements found in electron
and ion beam systems, ion implantation and X-ray systems. There
are 3 different input voltage variants available to order, the OLS10KD
(208VAC), the OLS10KDC (380VAC) and the OLS10KDE (400VAC).
Designed using the latest power switching IGBTs to ensure efficient
and reliable operation over the full operating range, the Series OLS10KD
will give exemplary performance in the most severe of electrical
environments. The Series OLS10KD achieves an exceptionally high
packing density for high voltage power supplies of this power level,
giving 169W/Litre, 2.7W/inch3. The 6U construction allows operation at
full power when close-mounted in a standard equipment rack, giving
significant savings in rack space in large systems. Many components
are common between the HE and LE supplies, minimising the space
required for the dual configuration. Featuring HiTek Power’s unique
Arc Count and Extinguish (ACE) system for managing systems where
load arcing is endemic, the Series OLS10KD protects both itself and
the load from damage that may be caused by excessive arcing whilst
allowing normal operation to continue.
The Series OLS10KD features both analogue and remote control
(optional RS232) interfaces. A full set of commands is available over
the RS232 interface to control and monitor the operation of the power
supply.
SPECIFICATION
Output Power:
10kW for the HE supply and 1kW for the LE supply at full rated output
voltage and current.
Output Voltage:
Units available with maximum HE output voltages from 10kV to 100kV,
and LE output voltages from 1kV to 10kV.
Output Current:
Up to 1A for 10kV HE & 1kV LE, and 100mA for 100kV HE & 10kV LE (see
table).
Input Voltage:
OLS10KD:tt
208VAC ±10% (187VAC to 229VAC) 47-63Hz 3 phase
plus protective earth.
OLS10KDC:t
380VAC ±10% (342VAC to 418VAC) 47-63Hz 3 phase
plus protective earth.
OLS10KDE:t
400VAC ±10% (360VAC to 440VAC) 47-63Hz 3 phase
plus protective earth.
Input Current:
Less than 36A per phase.
w w w. h i t e k p o w e r. c o m
"