Volute casing pump CBT0 pages
133.21801.52.01 E PUMP TECHNOLOGY CBT
09/2005
Volute Casing Pump
additional sizes to those of ISO 2858/EN 22858
CBT• 100160...350400
TECHNICAL DATA
Output: up to 2200 m3/h
Delivery head: up to 160 m
Speed: max. 1500 until 3000 rpm
depending of the pump size
and material execution
Medium temperature: max. 350 °C
Casing pressure: until 25 bar
Shaft sealing: stuffing box or mechanical seal
Flange connections: PN 16 or PN 25
Optional drilled PN 40, ANSI
RF 150 or ANSI RF 300
Sense of rotation: clockwise, when seen from the
drive on the pump
APPLICATION
Series CBT• volute-casing pumps can be used where the
requirement is for pumping of clear or slightly dirty or even
corrosive liquids.
Series CBT• pumps are therefore suitable for use in the:
chemical and petrochemical industries
pharmaceutical industries
plastic and rubber industries
ferrous and non-ferrous metal industries
paper and cellulose industries
textile industries
food and drink industries
thermal power stations
municipal water supply and irrigation
particularly in applications in:
all processing plants,
pumping of acids, brine and alkalis and all types of
hydrocarbons,
surface treatment and surfacing hardening of metal, e.
g. galvanizing, anodizing, phosphatizing,
desalination and extractions plants,
in heating engineering for circulation of water and
other heat transfer fluids,
water treatment and supply,
treatment of industrial effluents.
DESIGN
Process type, single-stage, volute casing pumps with design
features and nominal rating to ISO2858/EN22858. For pumping
of liquids with high temperatures (200ºC) special executions with
centre line feet are available (RBT•) upon request.
The process design permits dismantling of the complete bearing
unit towards the drive end, without the pump casing having to be
disconnected from the piping. If a spacer coupling is used it is
also unnecessary to disconnect the motor.
The list comprises 20 pump sizes, with maximum
interchangeability, these are covered with four bearing housing
sizes.
CONSTRUCTION
Sizes with single volute casing:
100160, 125200, 150200, 150315, 150400, 150500
200250, 200315, 250300, 250315
Sizes with single volute casing with diffuser:
150630, 200630
Sizes with double volute casing:
Remaining sizes.
Casing pressure:
Material execution: GG GGG Stainless
steel
Temperature: -10 to 120 ºC
Temperature: -20 to 120 ºC
16 25
25
16
16
Temperature: 120 to 200 ºC 16 10
Please note:
Casing pressure = Inlet pressure + shut off head.
max test pressure = GGG 33 bar; GG and SS 21 bar
Branch positions:
Suction branch axial, discharge branch radially upwards.
Flanges:
DIN 2533 PN 16 for GG25.
DIN 2534 PN 25 for GGG-40.3.
DIN 2543 PN 16 for stainless steel.
Flanges can be supplied drilled to ANSI
Bearings:
One oil lubricated deep grove ball bearing to DIN 625 on the
pump end, two single-row angular contact ball bearings in an
O arrangement on the drive end.
• Oil level control by constant level oiler as standard.
• Bearing brackets are optional equipped with tapped holes
for installation of temperature/vibration sensors.
• Oil bath cooling can be provided.