Volute casing pumps0 pages
Volute casing pumps
ZLND 32 - 125 ... 300 - 500
133.65501.67.01 E PUMP TECHNOLOGY ZLND
09/2001
TECHNICAL DATA
Flow: max. 1800 m³/h
Head: max. 140 m
Speed: max. 3600 rpm
Material: cast iron (0B,0C,0E) and stainless steel (4B)
Temperature: max. 170 ºC depending on the shaft sealing
and material execution.
Casing Pressure: material design 4B PN 16
0B, 0C, 0E PN 16 / 101) / 142)
Shaft sealing: mechanical seal or stuffing box
Flange connections: material design 4B DIN 2501 PN 16
0B, 0C, 0E DIN 2501 PN 16 / 103)
Direction of rotation: clockwise when looking at the pump
from the drive end.
APPLICATION
Volute casing pumps of the ZLN range (meeting DIN 24255 / EN 733
and ISO 9908) are used when clear or turbid liquids free from solid
particles are to be pumped. Application areas for pumps in this range
include:
Automobile, mechanical and general engineering industries
Food and beverage industry
Pharmaceutical industry
Paint industry
Plastic and rubber industry
Iron and non-ferrous metal industry
Paper and pulp industry
Textile industry
Building and construction industry
Heating and air conditioning
Drainage
Water supply
Irrigation
A range of materials is available to meet the specific needs of
customers. For applications not covered by this pump range we offer
the ISOchem range.
DESIGN
Horizontal, single-stage volute casing pumps with connections and
main dimensions to DIN 24255 / EN 733, plus 19 additional sizes.
The design of the pump allows the complete drive unit to be
withdrawn from the casing without disturbing the attached pipe work.
If a spacer type coupling is used, it is also unnecessary to disconnect
the motor.
The range covers 50 sizes with only 5 different bearing brackets.
CONSTRUCTION
Casing pressure:
Material 4B: max 16 bar from - 40 °C to +120 °C
max 14 bar from 120ºC up to +170 °C
Material 0B, 0C, 0E: max 16/101)/142) bar from - 20 °C to +120 °C
max 14/91)/82) bar from 120 ºC up to +170 °C
Max. casing pressure= inlet pressure + delivery head at zero flow
Please note: The relevant technical regulations and safety rules must
be observed.
Flanges location:
Axial suction flange, discharge flange radially upwards.
Flanges:
Material design 4B: Complies with DIN 2543 PN 16
Material design 0B, 0C, 0E: DIN 2533 PN 16 / 2532 PN 103)
Flanges drilled according to ANSI 150 can be supplied.
Bearings:
Bearing brackets 25, 35 and 45: Two ball bearings, lifetime
greased (2Z), design code B, or oil lubrication, design code C.
Bearing brackets 55 and 65: One double row angular contact
bearing on pump side, plus one ball bearing on drive side, grease
lubricated S or oil lubricated T.
Oil lubrication configurations with CLO (Constant Level Oiler) can
be supplied.
Shaft sealing:
Shaft sealing either by stuffing box or mechanical seal.
Code 041: Self-sealed, uncooled packing rings
Code 052: Uncooled packing rings, external sealing liquid
Code AF3: Balanced mechanical seal,
seal face materials SiC/Carbon, elastomer EPDM
Code BJ3: Unbalanced bellows mechanical seal,
seal face materials SiC/Carbon, elastomer EPDM
Code C23: Unbalanced bellows mechanical seal,
seal face materials SiC/Carbon, elastomer EPDM
Code AFS: Balanced mechanical seal,
seal face materials SiC/ SiC, elastomer FPM (Viton)
Code BJS: Unbalanced bellows mechanical seal,
seal face materials SiC/ SiC, elastomer FPM (Viton)
Code C2S: Unbalanced bellows mechanical seal,
seal face materials SiC/ SiC, elastomer FPM (Viton)
Code AFK: Balanced mechanical seal, seal face materials
SiC/carbon, elastomer FPM (Viton) double PTFE
(Teflon) wrapped
Code BJJ: Unbalanced bellows mechanical seal, seal face
materials SiC/Carbon, elastomer FPM (Viton)
Code C2J: Unbalanced bellows mechanical seal, seal face
materials SiC/Carbon, elastomer FPM (Viton)
Codes AX3, AXS, AXK: are equivalent to AF3, AFS, AFK plus
quench
Codes AY3, AYS, AYK: are equivalent to AF3, AFS, AFK plus
heating
Code A93, A9S, A9K: are equivalent to AF3, AFS, AFK plus
external flushing
As an option, Code 051 (as 052, but with inlet and outlet) and
other sealing execution can be supplied on request.
1) From 80-400 to 300-500 except 150-500
2) 150-500
3) 150-200, 150-250 and 200-250