PSP4000-H0 pages

Embracing Challenge

Portable Gas Sample Probe
PSP4000-H /C /T

PSP4000-H /C /T

Special Features
Light, easy to handle and compact

construction

Electrically heated – adjustable from 100

to 180 °C

With integrated micro-filter
Variable probe tube- and connection

technique

Integrated temperature measurement
Sample extraction also with heated

sample probe tube

Application
Previously, gas sample probes designed for
stationary use had to be used for inspection
measurements carried out at different locations. The weight and bulkiness of such
units often caused problems for technicians
engaged in mobile measurements.
Now the light, handy and heated gas-sample
probe PSP4000-H has been developed as
a logical complement to the portable M&C
sample gas conditionig systems. Despite its
compact design, the unit guarantees a full
range of functions. To avoid cooling and
condensation of sample gas in the extraction area, a heated sample probe tube
SP34-H.. (see data sheet 2-2.2) is available.

changeable PTFE hosing or PSP-W4M4/6
with a smaller outside diameter is supplied.
The probe’s electrical power is then fed
to the probe via the feed line integrated
within the sample line. An aluminiumcomposite case is optionally available
for the safe transport of the probe and up to 5
meters of type PSP4M4/6 respectively 8 m of
type PSP-W4M4/6 heated sample line.

Description
The portable gas sample probe PSP4000-H...
is electrically heated. Temperature controlling
is achieved by an integrated capillary sensorthermostat, adjustable from 100 to 180 °C. A
signal lamp is extinguished on reaching the
operating temperature and flashes in the
cycle of temperature regulation. A carrying
handle and a chain for in situ attachment
are mounted on the heat-isolated housing.
The integrated micro-filter element with
a fineness degree of 2 µm reliably retains
solid impurities and can be changed easily. For heavy-oil firing measurements,
a stainless-steel filter cartridge /FW for filterpads is optionally available.
The wide and versatile range of sampling
probes with diameters from 6 to 12 mm ø,
adapters and thread fittings allows adaptation
to the most varied circumstances.
At the version PSP4000-H/C calibration gas
injection into the probe is possible without
dismounting the probe.
Simultaniously temperature measurement
during sample extraction is also available for
version PSP4000-H/C/T.
In conjunction with the gas sample
probe PSP4000-H..., a specially designed
heated sample line PSP4M4/6 with inter-

Technical specifications and illustrations are without
obligation, subject to modifications. 06.15 - 1.00.00

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111

2.18