LOADING
finger protection OY3501300 pages
نسخه متنی
"
"
/ danger point security / integrated alignment mark / simple installation and setup / diagnostics at device / compact section measurements / short response time / self testing / connection with M12-connector | ||||||||||||
| ||||||||||||
finger protection, resolution 14mm category 4, muting function | ||||||||||||
description In line with IEC 61496-1 and IEC 61496-2, these light curtains are suitable for securing danger areas, particularly where there is a need to protect operators' fingers. Six different models are available, with protection field heights from 160 to 900mm. A resolution of 14mm and an operating distance of 6m are guaranteed with each of theͭse models. Special DIP switches enable a very simple and fast device setup. The DIP switches are located behind a cover on the front side of the receiver unit, which can be opened with a standard screwdriver. In this way, the system can be configured according to the safety requirements. As well as selecting the manual or automatic reset function, it also allows the selection of muting or partial muting. The transmit and receive units are optically synchronized. Muting is a time-limited delay of the protection function, | ||||||||||||
with additional sensors to differentiate between persons and objects. Using this function, objects such as palettes can pass through the protection field without triggering the protection function. As well as the control switching circuits, all inputs and outͭputs are located within the housing. Thanks to the compact dimensions (35 x 40mm), as well as the simple connection and installation technology, this range of light curtains offers the user optimum protection in all industrial safety applications. application examples Finger protection in danger points of ... ► punching machines ► bending machines ► molding machines | ||||||||||||
Kalver Stra͟e 27 D-58515 Ldenscheid | ||||||||||||
subject to alteration! version: March 2008 |