pressure sensors DW3531140 pages
PRODUCT: pressure sensor DESIGN: 35G1/4A0 600bar36G1/8-1 Ņ +1bar >
nnintelligent pressure sensoroperation via membranekeyboard or USB opto interface● pressure range between - 1 and 600 bar ● new electronics and program architecture ● analog output with adjustable starting and finishingpoint ● on/off switch delay is separately adjustable ● test function - simulation of the adjusted switchingfunctions in a pressure-free state ● peak hold function for the display ● automatic self-test function: overload, breakage andsensor function notes The sensor has an optical interface with which, in addition,all adjustment parameters can be adjusted and changed via
a PC or notebook. For dynamic measurements, the display and the analog out-put are equipped an adjustable damping action. Followinginstallation, the sensor body can be rotated by 350 and the
sensor display can be rotated by 180а by means of the soft-
ware.The test function offers a simple and quick possibility tocheck the function of the device and/or the analyses which
have been switched on. In connection with this, each pres-
sure value of the pressure range can be simulatedӔ throughthe operating buttons or by operating the PC. The device be-haves as if the actual pressure were available. function ipf electronics DW35 and DW36 pressure sensors offer a highlevel of operating comfort. All devices have 2 outputs. Although output 1 relates to afreely-programmable switching output, for output 2 a se-
lection can be made between an analog output, a switchingoutput or an alarm output.Devices with a 8-pin connection have both 2 switching out-
puts and an analog output available.
Among other things, the switching points, release positions,output logic and time delay can be programmed via themembrane keyboard. application The DW35 pressure sensor has a 1/4 inch connection withan outside thread and can be used for pressures up to 600bar. The media touching parts of the sensor are made of
stainless steel. The DW36 pressure sensor is suitable for low and negativepressure measurements. This sensor has a 1/8 inch connec-
tion. Its pressure pick-up is made of ceramic and is used in arange of Җ 1 bar to + 1 bar. >
ipf electronic gmbh Kalver Strae 27D-58515 LdenscheidSubject to alterationk11/001 11/07 ֖page 1fon +49 (0) 2351 / 9365-0fax +49 (0) 2351 / 936519 www.ipf-electronic.dee-mail: info@ipf-electronic.de size="-1">