ELC Series Controls0 pages

TPCX052-0811
CENTRAL VACUUM CONTROLS
ELC-M AND ELC-16 MODELS
VERSATILE
CONTROLS
FOR VACUUM
CONVEYING
The Easy Loading Control (ELC) from Conair offers a simple-touse interface for your conveying system.
With the ELC, loading parameter setup can be accomplished
with a few simple steps. Available with two application specific
models, the ELC is capable of handling all your conveying
needs.
ELC-16 Control
SIMPLE-TO-USE PENDANT FOR CONVEYING CONTROL
The ELC is available as two models;
the ELC-M and the ELC-16. The ELC-M
is used for stand-alone hopper loader
applications. The ELC-16 uses a CAN
open network that allows up to 16 controls with receivers on one network
cable, operated by a pump controller.
The ELC’s optional ControlMate pendant uses the same type of intuitive interface as the ELC control, but allows
the capability to change a total of 16
preset parameters to fine-tune your
conveying needs. The ControlMate
pendant can be used interchangeably
with either the ELC-M or ELC-16 controls.
The ELC will ship mounted and connected to your loader or receiver when
purchased from Conair. Installation of
your loader or receiver with the ELC is
as simple as bolting it to your material
vessel and connecting your power
and/or communication cables.
n
Easy-to-read display
Both the ELC control module and optional ControlMate pendant have clearly visible display panels. Loading sequence symbols and LED indicators display exactly where your loader or receiver is in the conveying process.
n
First-In/First-Out demand loading
The ELC-16 control module comes standard with First-In/First-Out (FIFO) demand. Unlike earlier loading controls, the ELC-16 does not load receivers based
on traditional demand loops. Instead, the receivers are loaded based on the
order of demand for material.
n
Configure for priority receiver demand
Use the optional ControlMate pendant to activate priority demand for your ELC16 control. This setting creates a second priority demand First-In/First-Out demand loop, that takes priority over the standard First-In/First-Out demand loop.
n
Interchangeable ControlMate pendant
The addition of the optional ControlMate pendant allows the capability to alter
up to 16 loading parameters for even more functionality. All loading changes are
saved within the standard ELC module.