Dust Collectors (DC)0 pages
TPCX012-0811
DUST COLLECTORS
DC1, DC2 AND DC3 MODELS
DUST-FREE
VACUUM
SYSTEM
FILTRATION
Conair Dust Collectors keep your plant free of air-born dust and
fines and prevent dust from fouling the vacuum pump.
A central vacuum dust collector allows dust filtration to take place
at the floor level. An air-tight collection container makes the removal of fines quick and easy.
Model DC3
Model DC2
Automatic filter cleaning is standard, lengthening the time
between service requirements. DC1 and DC2 models use an integrated “popper valve” to remove dust from the filter, while the DC3
has a sophisticated sequential blowback system.
EASY, NO TOOLS EMPTYING AND SERVICING
The integrated dust canister releases
easily for periodic emptying. A single
hand knob opens the lid for quick access to the filter cartridge.
Each model comes equipped with a
free standing floor frame. On models
DC1 and DC2, the stand may be removed for wall-mounting. An autodump option is available to
automatically remove collected dust or
to allow open dumping into other containers.
The DC1 and DC2 are sized to provide
the right amount of filter area for the
pump CFM and line size of the conveying system.
The largest dust collector, the DC3,
provides three filters with an automatic
sequential blowback system for maximum filter life.
n
Automatic filter cleaning
The cartridge filter releases entrained dust with each cycle.
n
Tangential air/dust inlet
Preliminary air/dust separation takes place right at the dust collector inlet. The
tangential inlet causes the air to spiral upon entry, spinning the dust free from
the air.
n
Flexible application
Easy, screw-in line adapters in a wide range of sizes mean that each unit works
with a variety of pumps and line sizes.
n
Simple maintenance
Remove the dust
collection canister
without tools for
easy dumping.
No-tools filter
removal provides
simplified filter
maintenance.