CFC series0 pages

TPHX023-0811

COOLING WATER STRAINERS

STAINLESS STEEL CFS SERIES

SIMPLE AND
EFFICIENT
SPACE-SAVING
DESIGN
Conair’s stainless steel CFS Series strainers provide an economical
solution for your full-flow cooling water filtration needs.
The CFS Series strainers significantly reduce particulate and
debris in cooling water, maximizing cooling system efficiency. As
water enters the bottom of the strainer and flows upward, heavier
sediment and debris is deflected and accelerated downward into
the large debris reservoir in the base of the strainer. Sediment
and debris are then purged from the reservoir through the debris
flush port.

MINIMAL MAINTENANCE; NO MOVING PARTS
The CFS Series Strainers are all constructed of T304 stainless steel, including the housing and the screen
frames.
The patented conical strainer screen
allows the larger debris to fall into the
reservoir while sealing the clean water
in the upper chamber. All models have
1/4 inch stainless steel inlet and outlet
gauges as standard.
To monitor the system pressure at
inlet and outlet, add the optional pressure differential alarm (PDA) package.
When the filter screen becomes
clogged, the audible/visual alarm
alerts personnel that the strainer
screen needs servicing.
The optional automatic timer flush
(ATF) package uses a time-based
valve controller to flush the debris
reservoir.

n

Stainless steel construction
Strainer housing and screen filter element are constructed of T304 stainless
steel.

n

Compact space-saving design
Reduces floor space requirements.

n

Low pressure loss
All models operate with less than 1 PSI pressure loss at maximum flow when
clean.

n

Large debris reservoir
Heavier debris and particulate fall down, away from the filter screen into the
debris reservoir, and can be flushed while the strainer is in service.
Backflushing is not required when purging the reservoir.

n

No minimum flow rates
Each model accommodates a wide range of flow rates with minimum flow
requirements.

n

Choose mesh options
Available screen meshes include 16, 30, 40, 50, 60, 80, 100, 120, 150, and
200, as well as 1/4 inch and 1/8 inch perforated sheet.