CAML-EVB Evacuation System0 pages

TPCX024-0811

COMPRESSED AIR MATERIAL LOADERS

CAML-EVB EVACUATION (TO BARREL) SYSTEM

MULTI-PURPOSE
MATERIAL
EVACUATION
The CAML-EVB is designed to load barrels with material it evacuates from granulator bins, gaylords or storage hoppers. You
get the same reduced noise and simple operation provided by
other CAML models. A simple on/off control eliminates load and
dump-time settings. The CAML-EVB uses a compressed air
powered Material Transfer Device (MTD) to move material from
the bin to the drum.
CAML-EVB shown
with optional drum
full alarm kit

DESIGNED TO MOVE MATERIAL SIMPLY AND QUIETLY
How It Works:
Using a compressed-air powered MTD
connected to a pickup device, the
CAML-EVB moves material from the
material source to a receiving barrel.
The CAML-EVB can be configured with
a demand sensor in the drum or at the
material source. An optional sensor
can be installed in the drum to provide
a fill alarm. When the CAML-EVB’s receptacle is full, simply replace it with
another drum or convey from the receiving drum to another destination.
The standard CAML-EVB includes:
• A proximity-type demand sensor
• Control assembly with solenoid
and air filter/regulator
• Barrel stand with adjustable arm
• Exhaust filter/barrel shroud
• MTD (Material Transfer Device)
• 20 feet of conveying hose

Low Material

Optional
Alarm Kit

Alarm

Strobe
will
remain
on
until problem
is resolved
Alarm

Delay Time

Adjustable

Compres
sed Air

Material

+
Inside

Exhaust
filter/drum
shroud

Loader

Control

Optional
Alarm
Sensor

Demand Sensor

(Barrel not included)

■

Load resin into barrels

■

Evacuate regrind from granulators

■

Quiet, efficient operation

■

No tools required to change drums
C-1

Material Transfer
Device and
optional horizontal
bin tube.