ds11000 pages

Features
10/100BaseT Ethernet port
Single-channel RS232 port (DB9)
Power input through DB9
Optional power-over-Ethernet
Compact (90x48x25mm)
DIN rail, wall mounting plates included

About
The DS1100 is a compact BASIC-programmable controller targeting cost-sensitive serial-over-IP and serial control
applications.
Built around the same T2000 ASIC as our EM500 “MiniMo” module, the DS1100 offers a single-channel RS232
port. Device power can be supplied via its power jack, pin9 of the DB9 (serial port) connector, or the optional
power-over-Ethernet board.
There are three LEDs on the device’s front: green and red main status LEDs, and a yellow Ethernet link LED.
Each DS1100 is supplied with the DIN rail and wall mounting plates.
The device comes preloaded with a fully functional serial-over-IP application.

Specications
▪
▪
▪
▪
▪

▪
▪
▪

▪
▪
▪

Superior upgrade to the DS203 device.
Based on the high-performance T2000 IC.
10/100BaseT, auto-MDIX Ethernet port.
Optional power-over-Ethernet.
Single-channel RS232 port on DB9M connector:
▪ TX, RX, RTS, CTS, DTR, and DSR lines;
▪ Baudrates of up to 115200bps;
▪ None/even/odd/mark/space parity modes;
▪ 7/8 bits/character modes;
▪ Optional RTS/CTS ow control;
▪ “12V” power input on pin 9 of the DB9.
512KB ash memory for rmware and application.
200 bytes of EEPROM space for data storage.
Three LEDs:
▪ Green and red main status LEDs;
▪ Yellow Ethernet link LED.
Power: 12VDC nominal (min. 9V, max. 18V).
Dimensions: 90x48x25mm.
Operating temperature range: -5 ~ 70 C.