ds10x50 pages

Features
DS1005: 10/100BaseT Ethernet port
DS1015: Ethernet, GPRS*, Wi-Fi*
8 digital isolated inputs that work with card readers too!
6 high-power (10A/30VDC) relays
1 RS232/485 port (on a terminal block)
IP68-compliant, -30C to +80C range
Free remote I/O application available
*optional

About
With eight opto-isolated sensor inputs, six high-power relay outputs, and one simple RS232/485 port, the DS1005
and DS1015 are a great t for industrial and building automation, security, safety, and access control applications.
The DS1005 offers the Ethernet interface only. The DS1015 features Ethernet, as well as optional Wi-Fi and GPRS.
Unlike many “remote I/O” products, the capabilities of the DS1005 and DS1015 are not limited to just relaying I/O
data to a central server. Programmability in Tibbo BASIC means you can create systems where intelligent decisions
are taken in real-time by the device itself.
The DS1005 and DS1015 are especially suitable for access control applications: Four of the eight sensor
inputs can be used to handle up to two card readers (two inputs per reader), which leaves four sensor inputs for
connecting to a door switch, exit button, etc.
The devices come preloaded with an open-source application for remote control/monitoring of the device’s inputs
and relays through a web-browser or Tibbo’s AggreGate device management system. This application can easily
be customized for any functionality desired.

Specications
▪

Network side — NB1000 (DS1005) or NB1010
(DS1015) board:
▪ Based on the EM1000 module (DS1005) or
compatible with it (DS1015);
▪ Optional GA1000 Wi-Fi add-on (DS1015 only);
▪ Optional Telit GC864 GPRS modem (DS1015);
▪ 10/100BaseT, auto-MDIX Ethernet port;
▪ 1024KB ash for rmware, application, and data;
▪ 2KB EEPROM for data storage;
▪ RTC with backup supercapacitor;
▪ Built-in buzzer;
▪ 11 status LEDs;
▪ Power: 10-18V;
▪ Firmware is upgradeable through the serial port
or network;

▪

▪
▪
▪
▪
▪

Interface side — IB1005 board:
▪ 8 opto-isolated sensor inputs, four of which can
be used to connect up to two Wiegand or clock/
data readers;
▪ 6 high-power (10A/30VDC) relays;
▪ 1 RS232/485 port;
▪ 8 status LEDs.
Dimensions: 91x104x99mm (excluding secondary
cover).
Extruded-prole aluminum body.
IP68 compliant (when used with secondary cover).
Operating temperature -30 to +80 degrees C.
CE- and FCC-certied.

continued on next page