DS1206N BASIC-Programmable Board0 pages

Features
10/100BaseT Ethernet port
Compact (52.6x38.0mm)
Up to 3.5 serial channels
Superior upgrade to EM1202EV
Power input/output through the serial connector
Free serial-over-IP Tibbo BASIC application
available

About
The DS1206N is a BASIC-programmable board designed primarily for serial-over-IP and serial control applications.
Being small enough to t inside your product, the board offers a rapid development alternative to using modules,
which require designing a new host PCB.
Like the DS1206 controller, the DS1206N features a multi-channel serial port. The device has a single serial port
connector and is priced as a single-port device, yet packs four independent serial channels. Have no use for those
DSR and DTR lines? Turn them into RX and TX of an additional serial channel. Don’t want CTS and RTS either?
That’s one more channel! In total, there are 15 different congurations to choose from.
The board is supplied in three versions offering various serial port and power options. It comes preloaded with a
fully functional serial-over-IP application.

Specications
▪
▪
▪
▪
▪
▪
▪

▪

Three options: DS1206N-RS, DS1206N-TM, and
DS1206N-TS.
Superior upgrade to the EM1202EV board.
Based on high-performance purpose-built 88MHz
T1000 IC.
10/100BaseT, auto-MDIX Ethernet port.
Up to 1024KB ash memory for rmware,
application, and data.
2KB EEPROM for data storage.
Four LEDs:
▪ Green and red status LEDs on top of the device;
▪ Link and speed Ethernet status LEDs on the
RJ45 jack.
Software-controlled onboard PLL.
web: www.tibbo.com

▪

email: sales@tibbo.com

Up to 3.5 serial channels:
▪ DS1206N-RS: RS232 port (DB9M connector);
▪ DS1206N-TM, “-TS”: TTL serial port (“pin
header” connector);
▪ Baudrates of up to 921,600bps;
▪ None/even/odd/mark/space parity modes;
▪ 7/8 bits/character modes;
▪ Full-duplex mode with optional ow control;
▪ DS1206N-TM and “-TS”: half-duplex mode with
direction control;
▪ Flexible mapping with 15 different options, such
as:

continued on next page
phone: +886-2-26925443

fax: +886-2-26923139

address: Tibbo Technology Inc., 9F-3, No.31, Lane 169, Kang-Ning St., Hsi-Chih, Taipei, Taiwan 221