ds10x40 pages

Features
DS1004: 10/100BaseT Ethernet port
DS1014: Ethernet, GPRS*, Wi-Fi*
8 A/D inputs (24 bits)
4 D/A outputs (14 bits, voltage/curr.)
2 low-power (1A/24VDC) relays
1 RS232/485 port (on a terminal block)
IP68-compliant, -30C to +80C range
Free remote I/O application available
*optional

About
Featuring high-precision A/D and D/A channels, the DS1004 and DS1014 are ideally suited for measurement and
control applications in the elds of building automation (think HVAC), process automation, lab work, etc.
The DS1004 offers the Ethernet interface only. The DS1014 features Ethernet, as well as optional Wi-Fi and GPRS.
Unlike many “remote I/O” products, the capabilities of the DS1004 and DS1014 are not limited to just relaying I/O
data to a central server. Programmability in Tibbo BASIC means you can create systems where intelligent decisions
are taken in real-time by the device itself.
The capabilities of the DS1004 and DS1014 are further expanded by two low-power relays and one simple
RS232/485 port. This port can be used for connecting an auxiliary serial device, card reader, etc.
The devices come preloaded with an open-source application for remote control/monitoring of the A/D, D/A, and
relays through a web-browser or Tibbo’s AggreGate device management system. This application can easily be
customized for any functionality desired.

Specications
▪

Network side — NB1000 (DS1004) or NB1010
(DS1014) board:
▪ Based on the EM1000 module (DS1004) or
compatible with it (DS1014);
▪ Optional GA1000 Wi-Fi add-on (DS1014 only);
▪ Optional Telit GC864 GPRS modem (DS1014);
▪ 10/100BaseT, auto-MDIX Ethernet port;
▪ 1024KB ash for rmware, application, and data;
▪ 2KB EEPROM for data storage;
▪ RTC with backup supercapacitor;
▪ Built-in buzzer;
▪ 11 status LEDs;
▪ Power: 10-18V;
▪ Firmware is upgradeable through the serial port
or network;

▪

▪
▪
▪
▪
▪

Interface side — IB1004 board:
▪ 8 A/D inputs (24-bit resolution);
▪ 4 D/A outputs (14-bit resolution, voltage/current
outputs);
▪ 2 low-power (1A/24VDC) relays;
▪ 1 RS232/485 port;
▪ 8 status LEDs.
Dimensions: 91x104x99mm (excluding secondary
cover).
Extruded-prole aluminum body.
IP68 compliant (when used with secondary cover).
Operating temperature -30 to +80 degrees C.
CE- and FCC-certied.

continued on next page