CPC5030 pages

CPC503
6U cPCI CPU Module

Features
For CPC503-01, Intel Core 2nd Gen (2/4 Cores):
Core i7-2715QE 6 MB 4C 2.1 GHz SV 45 W;
Core i7-2655LE 4 MB 2C 2.2 GHz LV 25 W;
Core i7-2610UE 4 MB 2C 1.5 GHz ULV 17 W.

For CPC503-02, Intel Core 3rd Gen (2/4 Cores):
Core i7-3612QE 6 MB 4C 2.1 GHz SV 35 W;
Core i7-3555LE 4 MB 2C 2.5 GHz LV 25 W;
Core i7-3517UE 4 MB 2C 1.7 GHz ULV 17 W.
RAM: DDR3 SDRAM 1333 MHz with ECC up to
4 GB, dual channel, soldered (for CPC503-01);
DDR3L SDRAM 1600 MHz with ECC up to 8 GB,
dual channel, soldered (for CPC503-02);
1x XMC/PMC expansion module
(x8 PCI-E GEN2/GEN3 + 64 bit/133 MHz PCI-X);
4x Gigabit Ethernet controllers (2x ports switchable
between P16 XMC connector and backplane
2x ports are available at the front panel);
10x USB 2.0 ports with HS, FS and LS support
(4x on front panel, 4x via RIO, 2x on P16 XMC);
4x SATA II ports (1x for 1.8" HDD, 1x at P16 XMC,
2x via RIO);
2x Displayport interfaces
(1x on front panel, 1x via RIO);
1x DVI-I on front panel;
1x DVI-D via RIO;
HD Audio via RIO and P16 XMC;
LPC is routed via RIO, P16 socket;
Supported OS:
Linux 2.6, QNX 6.5, Windows Embedded Standard 7
Operating temperature range:
Industrial: –40°C to +85°C, Commercial: 0°C to +70°C
MTBF: No less than 60 000

http://www.fastwel.com

Overview
CPC503 6U CompactPCI CPU module is an embedded computer on x86 platform
for use in server or client systems for a wide range of applications. CPC503 is based
on 2-nd generation Intel Core i7 (2/4 cores) processors operating at frequencies
from 1.5 to 2.2 GHz and on QM67 Peripheral Controller Hub. Up to 8 GB of DDR3
SDRAM memory with ECC operating at 1600 MHz is soldered onboard the CPC503.
CPC503 graphics capabilities include VGA, Displayport, DVI, and LVDS interfaces.
Four Gigabit Ethernet ports are used for networking. Interface set of CPC503 also
includes 12 USB 2.0 ports, four SATA channels, audio interface and standard J1-J5
CompactPCI connectors at the rear edge of the board. Fastwel CPC503 supports
one XMC/PMC expansion module mounted onboard and specially designed Fastwel
RIO587 rear I/O module. CPC503 provides one 64-bit 66 MHz CompactPCI interface
with hot swap capability. The module interfaces with CompactPCI bus via the builtin PCI-E <-> PCI bridge, this allows using CPC503 either as master system controller or as a slave device in one PCI bus segment. One of the features of CPC503
is support for PICMG CompactPCI Packet Switching Backplane Specification version 2.16. Being installed on a backplane supporting the packet switching mode,
CPC503 can communicate with peripheral devices or with the system master board
supporting this mode via two Gigabit Ethernet ports. The components of CPC503
are carefully selected according to the criteria of applicability in embedded systems
and long-term availability on the market. This makes this module an ideal device,
based on which the systems with long life cycle can be built.
CPC503 is compatible with Windows Embedded Standard 7, QNX 6.5.0,
VxWorks 6.8 (on request), and Linux® 2.6 operating systems.