KIC3010 pages

KIC301
Interface Module
Features
PCI 104 connector
Connector for Mini PCIe card
RS 232/485/482
Switching between 1 wire and RS 232/485/422
is performed via board jumper
Operating temperature range: –40°C to + 85°C
OS: WinXP Embedded, Linux 2.6
IP20, for the enclosure

Technical Specifications
Interfaces

Overview
KIC301

is

implemented

in

StackPC PCI format and is meant
for joint use with the CPU mod
ule, supporting StackPC/PCI. The
module is designed for extension
of its basic functions and is used
for the systems operated under
harsh conditions.
The module is equipped with two
Mini PCI Express slots for instal
lation of additional communica
tion equipment.

Supported OS

• PCI 104

• WinXP Embedded

• According to the specification requirements,
the board has installed PCI 104 connector designed
for the further extension of functionalities

Mechanical

• RS 232/485/482
• Independent selection of active interface
on each of the ports
• 2x interface ports are routed to IDC2 10
connectors
• Insulation 500 W

• 1 wire
• Switching between 1 wire and RS 232/485/422
is made via board jumper

• SATA interface
• Transfer rate is determined by CPU module
• 7xpin connector for a drive with SATADOM
form factor support
• SATA channel can be switched from
the module to stack

• Connector for Mini PCIe card
• Installation of peripheral devices in mini PCI
Express card form factor (rev. 1.2 compliant)
• Signals of WLAN#, WPAN#, WWAN# LEDs are
routed to a separate connector of the board
• SIM cards can use external connectors and
can be installed into board slots;
• Using jumper makes it possible to switch Mini PCIe
ports not used by USB device into the stack

http://www.fastwel.com

• Linux 2.6

• Resistance to multiple shocks: 50g
• Resistance to vibration: 25g
• Dimensions: 96,1×90,4×22,2 mm
• MTBF: 100 000 hours

Power
• Supply voltage: +5 V
(rated consumption – 4.2 A, peak consumption:
– 7 A, taking into account the maximum rated
consumption of two Mini PCI Express modules
• Internal power consumption is no more than 1W
• Internal power consumption within the circuit:
+5 W, no more than 0.2 A

Environmental
• Operating temperature range: –40°C to +85°C