4480120 pages

CPC308
Processor Module

Features
Processor: Intel Atom D510 or N450, 1.66 GHz,
from long term manufacturing program
Support for PC/104 Plus modules
System memory: 512 MB or 1 GB, DDR2 667 MHZ, soldered
Graphics: VGA up to 2048×1536 and LVDS, 18 bit,
up to 1365×768
Two Gigabit Ethernet ports
2×SATA, 300 MB/s; SATA NAND flash disk,
up to 4 GB; CF Type I/II
4×USB 2.0, 2×RS 232, 2×RS 485/422 isolated
Operating temperature ranges: 40…+85°С (industrial),
0…+70°C (commercial)

Technical Specifications
Overview

Processors:

with an optimized CPU performance to heat

• Intel Pineview M Single Core (N450),
1.66 GHz, 512 KB cache;
• Intel Pineview D Dual Core (D510),
1.66 GHz, 1 MB cache

emission ratio. CPC308 is based on Intel

Chipset:

Fastwel CPC308 is an embedded SBC in
PC/104 Plus format (PCI 32 bit, ISA 16 bit)

Atom CPUs with integrated graphics and
wide range of communication interfaces.
CPC308 estimated power consumption is
from 12 to 17 watts depending on model.
Thermal design alows using both air cooling
and conductive cooling.
The module includes CompactFlash socket, two Ethernet channels, four USB ports,
two SerialATA ports, four serial ports, and
NAND Flash drive.
PC/104 and PC/104 Plus modules can be
used for functionality expansion.
The module is supplied with preinstalled

• Intel ICH8M

System memory:
• DDR2 SDRAM 667 MHz w/o ECC, 512 MB /
1 GB, 64 bit addressing, soldered

Integrated graphics controller:
• 2D/3D accelerator;
• VGA output (up to 1400×1050 60 Hz (N450)
and 2048×1536 60 Hz (D510));
• LVDS interface (up to 1280×800 60 Hz
(N450) and 1366×768 60 Hz (D510),
single channel 18 bit mode)

HD Audio controller:
• Stereo line in/out
• Microphone input

PS/2 keboard and mouse port
Eight digit input/output:
• 8 input/output lines, individually
programmable
• 3.3 V, 8 mA

RTC:
• Battery backed, CR2032 (3V);

FRAM memory:

PCI bus:

• BIOS settings are stored in CMOS and
FRAM;
• 31 KB is available to user;
• Batteryless operation is possible

• 32 bit / 33 MHz;
• Support for up to 3 bus mastering devices

Optoisolated reset/interrupt input
Two watchdog timers:

ISA bus:

• WDT1 with fixed timeout period;
• WDT2 programmable timeout

• 16 bit / 8 MHz;
• Support for DDMA, ISA IRQ.

Flash BIOS:
• In system modification

FreeDOS operating system (if the preinstalled

Flash disk:

operating system options are not selected) and

• 4 GB NAND Flash (dual channel)
• SATA interface: 50 MB/s read, 45 MB/s write

is compatible with MS DOS 6.22, QNX 6.5,

• COM3, COM4: RS422 / RS485,
up to 921 Kbit/s, galvanically isolated,
automatic transmitter control

Possibility to connect external LED
indicators
Power:
• +5 V ±5%;
• Consumption current: max 3.2 A (D510)

Humidity:
Multiple shock/vibration stability:

Gigabit Ethernet:

Operating temperature range:
• From 40°C to +85°C

USB ports:

MTBF:

• Support for USB 1.1, USB 2.0 modes;
• Connection of up to four devices

• Min 100000 hours

SATA II:

• 115.6×101.5×23.7 mm

• Two channels available via SATA connectors;
• Up to 300 MB/s transmission rate

ing systems.

• Up to 80%, noncondencing

• Support for Type1/Type2 modules;
• UDMA mode support
• Two 10/100/1000 Mbit/s controllers

Windows XP Embedded, and Linux 2.6 operat-

CompactFlash socket:

OS compatibility:

Serial ports:
• COM1, COM2: RS232, complete,
up to 1.5 Mbit/s;

http://www.fastwel.com

• 50g/5g.

Dimensions:
• MS DOS 6.22, FreeDOS
• Windows XP (Embedded)
• Linux 2.6
• QNX 6.5