R30I-AST0 pages

R30I-AST Sensor

Integral Preamplifier

Acoustic Emission Sensor
Description and Features

Operating Specifications

PAC’s integral preamp sensors were specifically engineered
to attain high sensitivity and have the capability to drive
long cables without the need for a separate preamplifier.
Incorporating a low-noise input, 40 dB preamplifier and a
filter all inside the sensor housing, these transducers are
completely enclosed in metal stainless steel (or aluminum)
housings that are treated to minimize RFI/EMI interference.
Care has also been taken to thermally isolate the critical
input stage of the preamplifier in order to provide excellent
temperature stability over the range of -35º to 75º C.

t Dynamict
t
Peak Sensitivity, Ref V/(m/s)...................... 97 dB

t Environmental
t
Temperature Range.......................... -35 to 75ºC

Their integrated Auto Sensor Test (AST*) capability allows
these sensors to pulse as well as receive. This feature lets
you verify the sensor coupling and performance at any time

Shock Limit........................................... 500 g

Completely shielded crystal for maximum RFI/EMI
immunity

throughout the test.

Applications
This sensor provides additional noise rejection for applications such as production line process monitoring including
punch press monitoring, forming operations and stamping,
and process control applications such as leak detection
within process control plants in the presence of flow and
process noises.

Peak Sensitivity, Ref V/µbar...................... -22 dB

Operating Frequency Range.............. 200-450 kHz

Resonant Frequency, Ref V/(m/s). ............ 300 kHz
.

Resonant Frequency, Ref V/µbar............... 350 kHz

Directionality. .................................. +/-1.5 dB
.

t Physical
t
Dimensions. .................. 1.13” diameter x 1.23” h
.
t
................................................(29 x 31 mm)
t

Weight. ...........................................75 grams
.

Case Material. ..................... Stainless Steel (304)
.

Face Material. ....................................Ceramic
.

Connector. .............................................BNC
.

Connector Locations..................................Side

Ordering Information and Accessories
R30I....................................................... R30I-AST
Cable (specify cable length)...........................1234 - X
Magnetic Hold-Down . ...................................MHR30I
.
Amplifier......................................................AE2A
Sensors include
NIST Calibration Certificate & Warranty

TIFIED Q
U

GE

M

Due to continuing improvement, MISTRAS Group, Inc. reserves the right to amend specifications without notice.
Copyright © 2010 MISTRAS Group, Inc. All Rights Reserved.

MANA

ER

Fax: 609-716-0706

TY

T S YS T E

Phone: 609-716-4000

Email: sales.systems@mistrasgroup.com www.mistrasgroup.com

LI

EN

Products & Systems
Division

A

M

195 Clarksville Road, Princeton Junction, NJ 08550

C

Frequency response of the R30I-AST. Calibration based on ASTM
E1106; Calibration based on ASTM E976.

* AST — Auto Sensor Testing feature allows AE systems to control the sensor as a pulser
and a receiver at the same time. It can therefore characterize its own condition as well
as send out a simulated acoustic emission wave that other sensors can detect, so the
condition of the nearby sensors also can be tested.

ISO 9001

Rev. 10/05 #82-05